Operating On Channel 13; Operating On Channel 67; Measuring Water Temperature - Standard Horizon Hx750s Owner's Manual

6.16 OPERATING ON CHANNEL 13

Channel 13 is used at docks, bridges and for maneuvering in port. Messages
on this channel must concern navigation only, such as meeting and passing in
restricted waters. In emergencies and when approaching blind river bends,
High power is allowed. Pressing the [ H/L (
put from Low Power (1 Watt) to Medium (2.5 Watts), High (5 Watts), or Normal
(6 Watts). When you change from this channel then return to it, low power will
be automatically selected.

6.17 OPERATING ON CHANNEL 67

When channel 67 is used for navigational bridge-to-bridge traffic between ships,
Normal, High or Medium power may be used temporarily (in the USA band) by
pressing the [ H/L (
ceiver will revert to low power.

6.18 MEASURING WATER TEMPERATURE

The HX750S can measure water temperature. The measurable temperature
range is 14 °F to +140 °F (–10 °C to +60 °C).
6.18.1 ACTIVATING WATER TEMPERATURE SENSOR
1. Turn the transceiver off.
2. Hold down the [ SQL ] key, and then turn on the trans-
ceiver while still holding down the [ SQL ] key.
3. "SEt SEt" will appear on the display, indicating that the Menu
SEt SEt
SEt
("Set") Mode has been activated.
4. Press the [ SQL ] key to select the Menu item "03
dSP dSP
dSP dSP". dSP
5. Press the [ ] or [ ] key to select "Unit °C
°F °F °F °F °F".
Unit °C: Indicates the current temperature by °C.
Unit °F: Indicates the current temperature by °F.
6. Press the [ SQL ] key to save the new setting, then press
the PTT switch to exit to normal operation.
6.18.2 OPERATION
Soak the thermal sensor on the front panel of the HX750S in
water for several minutes. The water temperature will be
shown on the display.
Page 30
)] key. When you select this channel again, the trans-
)] key will change the power out-
03 03
03 03
Unit °C" or "Unit
Unit °C Unit °C Unit Unit Unit
Unit °C Unit
HX750S