Fiat Ducato Uconnect 5 Radio Manual page 29

Display
The "Display" menu shows the
following options:
❒ "Brightness" (this setting is not
available when the display mode is
set to "Automatic"): select
"Brightness" and press the "+" or "–"
buttons to adjust the display
brightness with the headlights on or
off (the setting not corresponding
to the active headlight condition
is greyed out).
❒ "Display Mode": press the "Display
Mode" button to set the display
brightness according to "Day",
"Night" or "Auto" condition. In "Auto"
mode the display brightness is
aligned to that of the instrument
panel.
❒ "Language": press the "Language"
button to select one of the languages
available.
❒ "Units": press the "Units" button to
select the units of measurement
for: - "Consumption": if the distance
is in "km", "km/l" or "l/100 km" can
be selected. If the distance is in "mi"
(miles), "miles per gallon" ("mpg")
are set automatically.
- "Distance": "km" or "mi".
28
- "Temperature": "°C" or "°F".
- "Tyre pressure": "PSI" or "BAR".
❒ "Voice Resp. Length": press the
relevant button to set the detail level
of the voice messages supplied by
the system and the suggestions
displayed.
❒ "Touchscreen Beep": press the
relevant button to activate/deactivate
the acoustic signal when the buttons
on the display are pressed.
❒ "Display Trip B": press the relevant
button to activate/deactivate the
displaying of the Trip B on the
instrument panel.
Time & Date
Use this function to set the clock.
Time setting
Press the button (6-fig. 1) on the
front panel then select "Clock & date"
(see fig. 15).
Select "Set Time" and press the
buttons (see fig. 15) to adjust hours
and minutes.
Press the "12h" or "24h" buttons to
select the time format.
The "am" and "pm" buttons are
available in "12h" mode.
15
In the Clock menu it is possible to
select "Show Time Status" which
allows clock status display to be
activated/deactivated on the upper area
of the display (for versions/markets,
where provided).
Date setting
To set the date proceed as for the time
setting: select "Set Date" to adjust
day, month and year.
Safety/Assistance
(for versions/markets, where provided)
or
Rain sensor
The sensitivity of the rain sensor can be
adjusted with this function (for
versions/markets, where provided).
F0Y1006