Displayed Information; Pairing A Mobile Phone - Fiat Ducato Uconnect 5 Radio Manual

Table of Contents

Advertisement

❒ pair up to 10 phones/audio devices
to make access and connection
easier and quicker;
❒ transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the car's audio system; the
system automatically mutes the radio
when the Phone function is used.
DISPLAYED
INFORMATION
When a phone is connected to the
system, the display shows various
information (if available):
❒ status of roaming;
❒ network signal intensity;
❒ mobile phone battery charge;
❒ mobile phone name.
To consult the list of mobile phones and
supported functions, visit the
www.fiat.it website (for Italy) or the
www.fiat.com website (for other
countries) or call Customer Service on
00800.3428.0000 (the number may
vary depending on the country: please
refer to the reference table in the
"Customer Service number list"
paragraph herein).
PAIRING A MOBILE
PHONE
IMPORTANT Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
The pairing procedure for a mobile
phone is described below: always
consult the handbook for the mobile
phone in any case.
To pair the mobile phone, proceed as
follows:
❒ activate the Bluetooth ® function on
the mobile phone;
❒ press the PHONE button (10-fig. 1)
on the front panel;
❒ if no phone is paired with the system
yet, the display shows a dedicated
screen;
❒ select "Yes" to start the pairing
procedure, then search for the
Uconnect™ device on the mobile
phone (if "No" is selected, the Phone
main screen is displayed);
❒ when prompted by the mobile
phone, use its keyboard to enter the
PIN code shown on the system
display or confirm on the mobile
phone the PIN displayed;
❒ from the "Phone" screen you can
always pair a mobile phone pressing
the "Settings" button: press the
"Add Device" button and proceed as
described above;
❒ during the pairing stage a screen is
displayed showing the progress of
the operation;
❒ when the pairing procedure is
completed successfully, a screen is
displayed: answer "Yes" to the
question to pair the mobile phone as
favourite (the mobile phone will have
priority over all other mobile phones
that will be paired subsequently). If no
other devices are paired, the system
will consider the first associated
device as favourite.
Note The priority is determined
according to the order of connection for
mobile phones which are not set as
favourite. The last phone connected will
have the highest priority.
Note On some mobile phones, to
make the SMS voice reading function
available, the SMS notification option
on phone must be enabled; this option
is usually available on the phone, in
the Bluetooth connections menu for a
device registered as Uconnect™. After
enabling this function on the mobile
phone, it must be disconnected and
reconnected with the Uconnect™
system in order to make it effective.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents