Installing And Launching Xnconnect - AMX HDMI-UTPRO-0808 Instruction Manual

Installing and Launching XNConnect

Use XNConnect software only if you need to customize or change the configuration information from the original
specification.
Important: Even if XNConnect is already on your PC, install the newest version from www.amx.com.
We strongly recommend uninstalling the old version of XNConnect before installing a new version.
System Requirements






To install XNConnect from www.amx.com:
1.
Close all other applications currently running on your PC.
2.
Go to www.amx.com and login as a Dealer to download XNConnect.
3.
Optional – Select the Release Notes to read about the software before installation.
4.
Select Install.
5.
Follow the directions in the subsequent dialog boxes.
Note: If your AMX account has the required permissions, the newest version of XNConnect can be
downloaded from www.amx.com. An AutoPatch INI Updater file can also be found on the AMX website under
Tech Center \ AutoPatch Tools for updating XNConnect with information for new support devices (an account
is not required).
To launch XNConnect:
1.
From the Start menu, select Programs.
2.
Select AutoPatch Applications (or other file group you specified during the installation).
3.
Select the XNConnect folder.
4.
Select XNConnect.
The XNConnect program opens.
Instruction Manual – HDMI-UTPRO-0808
®
Windows XP Professional
233 MHz processor
Minimum of 128 MB of RAM
20 MB of available hard drive space
800x600 screen resolution (1024x768 is recommended)
Serial port and RS-232 null modem cable
Appendix C – Managing Configuration Files
Getting Started dialog box
111