Fine Tuning Channel Reception; Lna (Low Noise Amplifier); Changing The Picture Standard - Samsung Plasma Display Panel Television Owner's Instructions Manual

Fine Tuning Channel Reception

➢
Not available in DTV or external input mode.
If the reception is clear, you do not have to fine tune the channel, as this is done
automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the channel manually.
1 Press the MENU (
Press the ... or † button to select Channel, then press the ENTER/OK (
2
button.
Press the ... or † button to select Fine Tune, then press the ENTER/OK (
3
To obtain a sharp and clear picture and good sound quality, press the œ or √ button until you reach the optimal
4
setting. Press the ENTER/OK (
➢
To reset the fine tuning to 0, select Reset by pressing the ... or † button.
Press the ENTER/OK (
5 Press the EXIT button to exit.
➢
Fine Tune Store will change the colour of the Channel OSD (On Screen Display) from White to Red and
add the "*" mark.

LNA (Low Noise Amplifier)

This function is very useful in the situation that the TV is used in weak signal.
LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier
boosts the incoming signal.
1 Press the MENU (
Press the ... or † button to select Channel, then press the ENTER/OK (
2
button.
Press the ... or † button to select LNA, then press the ENTER/OK (
3
Select Off or On by pressing the ... or † button, then press the ENTER/OK (
4
5 Press the EXIT button to exit.
➢
Depending on areas, factory mode of LNA, will be set up as On or Off.

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing
requirements.
1 Press the MENU (
Press the ... or † button to select Picture, then
2
press the ENTER/OK (
3 Press the ENTER/OK (
Select the required mode by pressing the ... or † button, then press the ENTER/OK (
4
Available modes: Dynamic, Standard, Movie, Custom
➢
The settings values may vary depending on the input source. (ex. RF, Video, Component, PC, or HDMI)
5 Press the EXIT button to exit.
➢
◆ Choose Dynamic for viewing the TV during the day or when there is bright light in the room.
◆ Choose Standard for the standard factory settings.
◆ Choose Movie when viewing the movie.
◆ Choose Custom if you want to adjust the settings according to personal preference.
) button to display the menu.
) button.
) button.
) button to display the menu.
) button to display the menu.
) button.
) button twice.
English - 15
Fine Tune
P 1 *
Reset
Adjust Save
P 1 *
Mono
)
) button.
TV
Channel
Country
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
)
LNA
Move
) button.
) button.
TV
Mode
Contrast
Brightness
Sharpness
Colour
Tint G 50
Colour Tone
Reset
Move
) button.
+ 3
Return
: Belgium
: Off
Enter Return
Mode
: Dynamic Dynamic
100
Standard
50
Movie
75
Custom
55
R 50
: Cool1
Enter Return