Product Specification 2-2 Key Features Model PS-50Q7HD 1227.1(W) x 95.5(D) x 802.2(H) mm (Without Stand) Dimensions 1227.1(W) x 340(D) x 844.8(H) mm (With Stand) 42.6 Kg (Without Stand) Weight 49.0 Kg (With Stand) EU : AC 220-240V~, 50Hz Voltage CIS : AC 100-240V~, 50/60Hz Colour System PAL, SECAM, NT3.58, NT4.43...
Page 7
- You can input the DVI signal using the DVI ↔ HDMI conversion cable. - When connecting HDMI input using the DVI ↔ HDMI conversion cable, connect the sound signal to the DVI Audio IN port using a separate connection cable. Samsung Electronics...
Page 8
▶ 480i/p, 576i/p, 720p, or 1080i is not available in PC mode. ▶ The PC text quality is optimum in XGA mode (1024 x 768@60Hz). (PS-42C7HD/PS-42Q7HD) ▶ The PC text quality is optimum in WXGA mode (1360 x 768@60Hz). (PS-50C7HD/PS-50Q7HD) Samsung Electronics...
Page 9
Teletext ○ Add-on services ○ ○ Channel list ○ ○ Auto store ○ ○ Manual store ○ ○ Language selection ○ ○ SPDIF OUT PCMCIA (Type Ⅱ) ○ ○ Connectors RS-232 (Phone Jack) ○ ○ Modem Smart Card Samsung Electronics...
Page 10
○ ○ ○ Auto store ○ ○ ○ Manual store ○ ○ ○ Language selection ○ ○ ○ SPDIF OUT PCMCIA (Type Ⅱ) ○ ○ ○ Connectors RS-232 (Phone Jack) ○ ○ ○ Modem ○ Smart Card ○ Samsung Electronics...
3-1 Service Instruction ■ Before Performing After Sales Services 1. Check if the measurement and test equipment is working properly. 2. Secure sufficient work space for disassembling the product. 3. Prepare a soft pad for disassembling the product. Samsung Electronics...
※ The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to change for the improvement of product functions. ※ If you have adjusted the settings in Service Mode, you have to reset the product. Samsung Electronics...
T-AUDMPEUS-XXXX (Sub Micom Ver) EnergySave : OFF Month / Day / Year / Hour / Min. / Sec. LBE/FBE : OFF FRC-Micronas : OFF FRC-Samsung : OFF : OFF CarrMute : OFF Language : English Shop Mode : OFF High Deviation...
Page 16
Analog PR Gain FEH 9AH 80H FEH Black Level 00H 00H 00H SVP Brightness 00H 00H 00H Calibration Target : high delta AV ADC F8H 04H COMP ADC F8H 04H PC ADC F8H 04H ALL RGB F8H 10H Samsung Electronics...
Page 17
Alignment & Adjustment 1. Calibration 5. Option Block 2. Option Table XXXX XXXX 3. White Balance FRC-Micronas 4. SVP-FX FRC-Samsung : Patt Sel 5. Option Block B Ratio 6. STV8257/STA323W W Ratio 7. YC Delay Pdf Min 8. Adjust Urd Th 9.
Page 18
Movie Color : 50 Movie Sharpness : 40 LNA PLUS : RFDB-1 Level RFDB-2 Level RFDB-3 Level RFDB-4 Level Hotel Option : Hotel Mode PWR On CH PWR On Vol. Max Volume L.Key Lock PWR On Src 9. ----- Samsung Electronics...
Page 19
W2 B Offset T-MST50PEUHQ-XXXX (Main Micom Ver) Movie Contrast T-AUDMPEUS-XXXX (Sub Micom Ver) Movie Brightness 50 Month / Day / Year / Hour / Min. / Sec. Movie Color Movie Sharpness 25 11. Checksum 12. Reset 13. ----- Samsung Electronics...
2) Select "AV CALIBRATION" again in CALIBRAION MENU. 3) After Completing Calibration, come out "Av success". OSD on the screen (bottom-side) for about 3 seconds. Source AV : PAL composite, Component : 1280*720/60Hz PC : 1024*768/60Hz ( Chess Pattern ) Samsung Electronics...
Page 21
No 6 : 1280X720@60 Hz No 21 : 1024X768@60 Hz * Pattern No 36 : 16 Color Pattern No 16 : Toshiba ABL Pattern 2. Optical measuring device : CA210 (FL) Please use the MSPG-925 LTH generator for model PS-50Q7HD. Samsung Electronics...
Page 22
- Adjust red offset ('x') and blue offset ('y') to the color coordinates. Low light Measurement point ( SAMSUNG WHITE BALANCE Adjustment PATTERN with FPD ) * Do not adjust green offset data. d) Adjust the high light. (Refer to table 1, 2 in adjustment position by mode) - Adjust red gain ('x') and blue gain ('y') to the color coordinates.
1. Installthe Flash Downloader Connect Set (Service Jack) and Jig Cable to execute Program Update. 2. Flash Downloader program update - Before Turning on the set, Click "connect" which is under of OSD Screen. - Turn on the Set. Samsung Electronics 3-11...
Page 24
① Turn off PDP-TV. ② Connect the RS-232 cable to the PDP-TV ③ Execute the sv2_fr.exe file. ④ Assign the path of samsung.tvz file (application image) ⑤ Execute the progress follow the screen until step 2. ⑥ Turn On the PDP-TV.
ASSY PDP P-ADDRESS F BUFF BOARD BN96-03364A ASSY PDP P-ADDRESS G BUFF BOARD BN96-03365A ※ When replacing the SMPS (DC DC) or PDP panel, you have to check the voltage printed on the panel sticker and adjust it. Samsung Electronics 3-13...
Page 26
(If you do not adjust the voltage, an abnormal discharge symptom may appear.) Value Board Adjustment SMPS-MAIN Vset SMPS-DC/DC Vscan -190 Voltage SMPS-MAIN SMPS-DC/DC Label 2. A point of adjusting SMPS-MAIN voltage. Vs Adjustment Vs Test point Va Test point Va Adjustment 3-14 Samsung Electronics...
Page 27
Alignment & Adjustment 3. A point of adjusting SMPS-DC/DC. Test Point Vset (Middle) Vscan (Right) Vscan/Vset Adjustment Point Adjustment Point Ve Test Point * Use base chassis of PDP panel as GND point. Samsung Electronics 3-15...
4. If the VS_ON signal from the Logic Board changes from Low to High, the Main SMPS supplies VS power to the X and Y Main Board through the DC-DC SMPS, and the screen displays a picture on it. Samsung Electronics 13-1...
O.C.P in each port is the same as following Table 2. Table 2. OCP specification Protection Output Circuit Trip point Notes 3.0 - 6.0A Shut down by Under Voltage Over Current 3.5A or more Short Circuit Protection Shut down by Under Voltage Output except Vs&Va ---------- 13-2 Samsung Electronics...
Page 31
When the Vcc voltage is higher than O.V.P level [Vcc(OVP)=31.2V(TYP)], Latch is on and power board is shut down. After Latch is on, this power board can not operate before the voltage of an electric capacitor C8123 is fully discharged for about 5 minutes. Samsung Electronics 13-3...
Page 32
If the temperature on the chip parts is higher than about 135℃, this power board operates in thermal protection mode and makes Latch on, finally this power board is shut down. < Vds Voltage Waveform on Sub-power Circuit FET > 13-4 Samsung Electronics...
Page 33
PFC controller has the function of over current protection by sensing the voltage (2 pin) coming from the current-sensing resistor R8201. If the over current flows across the sensingresistor, controller decreases the FET duty ratio for protection of part's damage. < FET Vds Waveform (100Vac input) > < FET Vds Waveform (230Vac input) > Samsung Electronics 13-5...
Page 35
Circuit Description 13-2-2 PDP Module 1. Logic Board ■ A name of main part of Logic Board and vocabulary. Samsung Electronics 13-7...
Page 36
Full White, Jumper No : Black The Power Block that receives 5V input from SMPS and outputs 3.3V (L4957AD3.3V Main Power Input ⑬ regulator adopted) X Connector The connector to output the X Drive Board control signal. ⑭ 13-8 Samsung Electronics...
Page 37
▶ If the screen is displayed abnormally when the Vref voltage is normal, conduct a short test to find any abnormal points and repair the points, if found. If the found short is internal, replace the board. ▶ The following waveform shows a waveform when the V-sinc and address data are output properly. Samsung Electronics 13-9...
Page 38
3. D1.2V (for ASIC Core) Since it is RSDS, process the signal using a differential signal. The above waveform is a positive signal. The waveform of the negative signal output is the reverse of the positive signal. 13-10 Samsung Electronics...
Page 39
In addition, a weak discharge is introduced, because the applied voltage is low. Samsung Electronics 13-11...
Page 40
This is connected to the Y port part of the panel. It outputs 1) Sustain voltage wave form (including ERC), and 2) Y Rising, Falling Ramp waveform, and maintains 3) Vscan bias. 3) Y Buffer Board A board, which applies the Scan waveform to the Y terminal block, consists of 12 Scan Driver ICs (TI SN755870: 64 Outputs). 13-12 Samsung Electronics...
Page 41
By floating the Odd line that caused the Sustain Discharge in the IDS section to the Vscan-h level, and introducing the Sustain Discharge only for Even lines, it compensates for the optical output difference between the Even and Odd lines. 6) CMS Pulse (ComMon Sustain Pulse) Actual optical is output during the common Sustain Discharge section. Samsung Electronics 13-13...
Page 42
FET2 short circuits, GND is output via the output terminal. 2) When a signal is applied to G1, FET1 short cir cuits and when no signal is applied to G2, FET2 is opened, and 180V is output via the output terminal. 13-14 Samsung Electronics...
Page 45
▶ Adjust the drive waveform so that the main reset (rising, falling:40usec) is the same as those in the F/W pattern. (※ Attachment 1 reference) 120usec 70usec Vsc_h Variable register Rising ramp Variable register Falling ramp Variable register < Y-Main > <Voltage Adjustment Specifications> Vset Vsc_l Vsc_h 190V 200V -190V -70V 115V Samsung Electronics 13-17...
Page 46
Circuit Description ▶ Check that the output of X-Out of the X board follows the waveform of ※Attachment 2 when the power is supplied. X-OUT 13-18 Samsung Electronics...
Page 54
Vs Input Part Vscan Output Rectification Transformer Block Auxiliary Control Power Feedback Switching Block Block Vset Output Rectification Transformer Block (175~210) Auxiliary Control Power Feedback Switching Block Block Ve Output Rectification Transformer Block Auxiliary Control Power Feedback Switching Block Block Samsung Electronics...
Page 55
Block Diagram 7-2-4 Module Driver Board Block Diagram 1. Y Main Board 2. X Main Board Samsung Electronics...
Page 56
THERMAL CLK A, B CLK A, B CLK A, B DATA BLK, POL, STB, CSE BLK, POL, STB, CSE BLK, POL, STB, CSE 50pin Connector FM75 50pin Connector 50pin Connector 7-2-6 Main Board Block Diagram i t l Samsung Electronics...
Page 57
A DIO_ I R H t n o r l 2 MHz E T_ P L ENC D STEM T_F A ITS , U M _DIR, D t a a EM_ I R , CTS, , R DCD Samsung Electronics...
9-3 Function Board Function Key. Located on the side of the unit. 9-4 Side AV Board Loc. No. Description CN102 S-VIDEO2 Input Jack ① CN103 AV2 Input Jack ② CN104 Earphone Jack ③ CN105 Side AV Connector ④ Samsung Electronics...
Schematic Diagram 10. Schematic Diagram 10-1 Analog 10-1-1 POWER This Document can not be used without Samsung’s authorization. Power Signal Samsung Electronics 10-1...
Page 68
Schematic Diagram 10-1-2 MICOM This Document can not be used without Samsung’s authorization. Power MICOM Signal > - > - ( I - Samsung Electronics 10-2...
Page 69
Schematic Diagram 10-1-3 IN_OUT_JACK This Document can not be used without Samsung’s authorization. Power Signal Samsung Electronics 10-3...
Page 70
Schematic Diagram 10-1-4 HDMI This Document can not be used without Samsung’s authorization. Power Signal HDMI_INPUT 10-4 Samsung Electronics...
Page 71
Schematic Diagram 10-1-5 SOUND This Document can not be used without Samsung’s authorization. Power SOUND Signal Samsung Electronics 10-5...
Page 72
Schematic Diagram 10-1-6 SVP-PX This Document can not be used without Samsung’s authorization. Power Signal 10-6 Samsung Electronics...
Page 73
Schematic Diagram 10-1-7 TUNER 10-1-9 FBE_Option This Document can not be used without Samsung’s authorization. This Document can not be used without Samsung’s authorization. Power Power Signal Signal 10-1-8 FUNCTION This Document can not be used without Samsung’s authorization. Power...
Page 74
Schematic Diagram 10-1-10 FRC This Document can not be used without Samsung’s authorization. 10-8 Samsung Electronics...
Page 75
Schematic Diagram 10-1-11 FRC Memory This Document can not be used without Samsung’s authorization. Samsung Electronics 10-9...
Page 76
Schematic Diagram 10-1-12 LVDS This Document can not be used without Samsung’s authorization. Power Signal 10-10 Samsung Electronics...
Page 77
Schematic Diagram 10-1-13 DTV / TUNER / POWER This Document can not be used without Samsung’s authorization. Samsung Electronics 10-11...
Schematic Diagram 10-2 Digital 10-2-1 STI5517 LMI / EMI / POW1.8 This Document can not be used without Samsung’s authorization. 10-12 Samsung Electronics...
Page 79
Schematic Diagram 10-2-2 STi5517 VIDEO / AUDIO / GPIO This Document can not be used without Samsung’s authorization. d i l d i l Samsung Electronics 10-13...
Page 80
Schematic Diagram 10-2-3 MEMORY / EXTERNAL UART This Document can not be used without Samsung’s authorization. > 10-14 Samsung Electronics...
Page 81
Schematic Diagram 10-2-4 INTERNAL CI INTERFACE This Document can not be used without Samsung’s authorization. Samsung Electronics 10-15...
Page 82
Schematic Diagram 10-2-5 POW3.3 / CLK / RESET / AV OUT / EXT CONN This Document can not be used without Samsung’s authorization. k l i > - k l i > 10-16 Samsung Electronics...
Page 83
12-1-2 Separation of ASSY COVER P-REAR Part Name Description Description Photo Cover ① Remove 4 screws.( Rear : M8,L16,ZPC(BLK),SWRCH18A,WP ② Remove 14 screws.( : BH,+,B,M4,L12,ZPC(BLK) ③ Remove 4 screws.( : BH,+,S,M4,L10,ZPC(BLK) ④ Remove the ASSY COVER REAR. Samsung Electronics 12-1...
Page 84
12-1-5 Separation of FILTER-EMI AC LINE Part Name Description Description Photo Filter- ① Detach connector from Main SMPS. AC LINe ② Remove 2 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove a screw. : BH,+,S,M4,L10,ZPC(BLK) ④ Remove FILTER-EMI AC LINE. 12-2 Samsung Electronics...
Page 85
Description Description Photo Wall ① Remove 8 screws. Bracket : BH,+,B,M4,L12,ZPC(BLK) ② Remove 16 screws. : BH,+,S,M4,L10,ZPC(BLK) ③ Remove Wall Bracket. : Please lay the PDP panel face down on a soft surface when separating front cover. Samsung Electronics 12-3...
Page 86
① Remove 4 screws. : BH,+,WP,B,M4.0,L12,ZPC(BLK),SWRCH18A,- ② Remove the Speaker. 12-1-10 Separation of ASSY BOARD P-POWER&IR Part Name Description Description Photo Power ① Remove 2 screw. & : BH,+,-,S,M4,L8,ZPC(BLK) IR Board ② Remove the Power & IR Board. 12-4 Samsung Electronics...
Page 87
12-1-12 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARD Part Name Description Description Photo Logic ① Detach all connectors from the Logic Main Board. Board ② Remove 4 screws. : WSP,PH,+,M3,L8,NI PLT ③ Remove the Logic Main Board. Samsung Electronics 12-5...
Page 88
※ To separate the Flat Cable of the X-Board, press the upper and the lower sides of the connector. X-Main ① Detach all Connectors from the X Main Board. Board ② Remove 6 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove the X-Main Board. 12-6 Samsung Electronics...
Page 89
Y-Scan ① Remove 5 screws. : PH,+,WWP,M3,L8,NI PLT Connectors ① Separate the scan board from the Y-Main Board by detaching the 3 connectors and remove the Scan Boards. Samsung Electronics 12-7...
Page 90
Disassembly & Reassembly Part Name Description Description Photo Y-Main ① Detach all connectors from the Y-Main Board. Board ② Remove 8 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove the Y-Main Board. 12-8 Samsung Electronics...
Page 91
① Remove 4 screws. : PH,+,WWP,M3,L8,NI PLT ② Remove the still bar. Buffer ① Detach the all connectors from the buffer board. ② Remove 12 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove the E-Board and F-Board and G-Board. Samsung Electronics 12-9...
- Check to see if the cables are connected according to the connection diagram. 2. Check the power input to the Main Board. 3. Check the voltage in and out between the SMPS ↔ Main Board, between the SMPS ↔ X, Y Main Board, and between the Logic Boards. Samsung Electronics...
Is the Fuse (F101) of the Main SMPS Replace the Main SMPS Power Input Part blown? Check Main SMPS 804-1 Pin 10 : STB 5V = 5V Replace the Main SMPS Pin 8 : PS-ON = 0V Replace the Main Board Samsung Electronics...
Page 96
SMPS, CN of the X Main Board, and CN of the Y Main Board, a spark may be generated by the electric charge of the high capacity capacitor. Therefore, wait some time after separating the power cord from the unit. Samsung Electronics...
Page 97
SMPS, CN of the X Main Board, and CN of the Y Main Board, a spark may be generated by the electric charge of the high capacity capacitor. Therefore, wait some time after separ ating the power cord from the unit. Samsung Electronics...
Page 98
Main Board and the speaker replace the cable, if necessary. properly connected? Is the output voltage of SMPS Replace the Main SMPS normal? (CN803 #5) Is the speaker output terminal Replace the Main Board of the Main Board normal? Replace the Speaker Samsung Electronics...
Page 99
- Check the tuner output signal (CVBS). - Check the power input of the Main board. Troubleshooting Procedures Is the antenna connection setting Configure properly properly configured? Check CN101 pin2 for +33V Replace the Main SMPS Replace the Main Board Samsung Electronics...
Page 100
* Please return back the broken Power Supply - It could be with difficulty finding the cause if you handle it first - Unless you return back it when the broken Power supply has only a little damage. it could make the other problem. Samsung Electronics...
Page 101
Some horizontal lines appear to be linked on screen Scan Buffer, FPC of X/Y Address Open Some vertical lines don't exist on screen Logic Main, Logic Buffer, TCP Address Short Some vertical lines appear to be linked on screen Logic Main, Logic Buffer, TCP Samsung Electronics...
Page 102
F5004 for VCC F4004 for VDD F5005 for OUT_L F4005 for Ve Q4002~Q4003 SHORT SHORT Q5009~Q5021 FET/ Q4011~Q4016 FET/ D5005, D5007 Replace the Board Replace the Board DIODE D4004 DIODE D5008 D4006~D4008 Y-MAIN X-MAIN Normal State Normal State Samsung Electronics...
Page 103
FUSE Replace the Board FUSE Replace the Board F5004 for VCC F4004 for VDD F5005 for OUT_L F4005 for Ve SHORT SHORT Q4002~Q4003 Q5009~Q5021 Replace the Board Replace the Board Q4011~Q4016 Y-MAIN X-MAIN Normal State Normal State 6-10 Samsung Electronics...
Page 104
④ Sustain Short (some horizontal lines appear to be linked on Video) [ Y-FPC ] Sustain Short (Discharging in unwanted Scan line) After Changing Y-buffer, Replace the Panel recheck the status There a defect on FPC Done (Defect is from Y-buffer) Samsung Electronics 6-11...
Page 105
Buffer Board and the Logic Main address data output section. Check the FFC connection status Check the detailed waveform Replace Logic Main / and control the signal waveform Address Buffer (E or F) / DONE Replace the Panel 6-12 Samsung Electronics...
13 ASSY BOARD P-POWER&IR BN96-03320A Power Button Board The remote control does not work properly, the LED does not work properly. 14 ASSY BOARD P-SIDE AV BN96-03075G Side AV Board The AV2 and S-VIDEO2 modes do not work properly Samsung Electronics 6-13...
- You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. Samsung Electronics 11-1...
S-Video RGB Video + Audio (L/R) Supported modes for HDMI/DVI and Component EXT 1 Only TV or DTV output is available. Output you can choose. EXT 2 480i 480p 576i 576p 720p 1080i HDMI/DVI 50Hz HDMI/DVI 60Hz Component 11-2 Samsung Electronics...
Teletext index 14 Remote control setup 10 Teletext hold 15 Selects a target device to be 11 Teletext size selection controlled by the Samsung 16 Teletext mode selection remote control (TV, DVD, (LIST/FLOF) STB, CABLE, VCR) 17 Teletext sub page...
11-2-1 Installation Notes 1. Contact a technician for installing the wall bracket. 2. Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. 3. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Page 112
( ) and hook ( ) down to secure the PDP on the wall mount as illustrated. Secure the PDP by inserting the Safety Pins, not to fall from the wall mount. PDP panel Wall attachment Wall panel bracket Samsung Electronics 11-5...
Page 113
Remove the Safety Pins to adjust the angle to 0°, and then secure the Safety Pins again. For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used, the PDP may fall, causing serious injury. 11-6 Samsung Electronics...
↔ CN3(DC-DC SMPS) CN5007(Y B'D) CN4000(X B'D) CN2710(F-Buffer) CN2005(Logic B'D) Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal D5.3V D5.3V D5.3V STD 5V Vs-ON D5.3V Vscan PS-ON Vset D5.3V D5.3V D5.3V Samsung Electronics...
Page 117
Wiring Diagram 8-2-2 Connect Cables ※ The code number of cable(Lead-connector) can be changed, see "5 Chapter. Electrical Part List." SMPS 12P LVDS 31P POWER 10P Code BN39-00632A BN39-00477A BP39-00053E Photo POWER 12P Code MD39-00074G Photo Samsung Electronics...
Page 118
Model : PS50Q7HDX/XEU SERVICE Manual PDP-TELEVISION FEATURES DTV Ready PDP TV ■ ■ ■ Supreme Picture Quality Supreme Convenience Quality RF, HDMI, 2 Scart, PC (Analog), ■ ■ Component, Video, S-Video ■ Slim line design Energy Saving ■ ■ PS-50Q7HD...