Daikin Stylish Series Service Manual page 14

1 Troubleshooting
To solve the error code
INFORMATION
It is recommended to perform the checks in the listed
order.
INFORMATION
In case of preferential kWh rate, the indoor unit also needs
a power reset.
1 Check for improper combination of the indoor unit and the
outdoor unit. See the combination table in the Databook for
more information.
2 Perform a check of the power supply, connections, wiring,...
between the outdoor unit and the indoor unit. See
supply" on page 52.
Possible cause: Faulty wiring between the outdoor unit and
the indoor unit.
3 Perform a check of the main PCB. See
page 35.
Possible cause: Faulty main PCB.
4 Perform a check of the indoor unit PCB. See
PCB" on page 30.
Possible cause: Faulty indoor unit PCB.
INFORMATION
If all procedures listed above have been performed and the
problem is still present, contact the helpdesk.
Service manual
14
"3.1 Power
"2.11 Main PCB" on
"2.8 Indoor unit
(C)(F)TXA15~50A2V1B(W)(S)(T) + RXA42+50A2V1B +
RXA20~35A2V1B
Split Stylish R32
ESIE18-03 – 2018.09