Understanding The Control Panel - Splendide Comb-o-matic 5200 Quick Reference Manual

Splendide installation instructions and use & care guide 5200
Table of Contents

Advertisement

Getting Started

Understanding the Control Panel

D
nProgram Selector (Turn clockwise only) (A) - Use this knob to
select one of 9 wash programs (see "Guide to the Wash Programs,"
p. 10).
• Delay Start Option: You can also use this knob to delay the start of any
wash program by 1, 3, 9, or 12 hours (see "How to Wash," p. 14).
IMPORTANT: Should you wish to interrupt a program in
!
progress or set a new one, advance the Program Selector
knob (A) to a "Reset" position and wait 5 seconds.
nDry Time Knob (B) - Use this knob to set the drying time up to 120
minutes. Once set, this knob will not move. NOTE: The last 12
minutes of the dry cycle is a cool down period (See " Dryer Cool
Down, " p. 7).
nWater Temperature Knob (C) - Use this knob to set your wash
water temperature. Choose between HOT, WARM, COLD, or
variations between. NOTE: Rinse water temperatures are always
COLD.
nDispenser Drawer (D) - This is where you add your detergent and
other laundry aids (See "How to Use the Dispenser Drawer," p. 13).
nPre-wash Button (E) - For heavily soiled loads, push this button to
add an extra wash to any wash program (except the Wool program
or when another Special Program (F, G, H) is selected).
nEasy Iron Button (Rinse Hold) (F) - Pressing this button prevents
fabric creasing, making items easier to iron. (Only available on
Permanent Press cycles and the Silk cycle). If pressed, the wash cycle
will come to a complete stop (Rinse Hold) at the "Anti-crease" part of the
dial-allowing you to leave items in the machine without spinning to
prevent wrinkling. You complete it by pressing the Easy Iron button
again. NOTE: If a dry cycle is preset, machine will not perform the anti-
crease (rinse hold) function.
8
M L
C
B
1 0 G . E
T T T T T he Knob
he Knob
he Knob
he Knob
he Knob
washer-dryer programs
washer-dryer programs
washer-dryer programs
washer-dryer programs
washer-dryer programs
A
nLow Spin Button (G) - Press this button to reduce the spinning speed
to 600 RPM during anyCotton Heavy Duty or Permanent Press
cycle-perfect for washing more delicate fabrics in these cycles.
nExtra Rinse Button (H) - Press this button to add an extra rinse cycle
to any Cotton Heavy Duty or Permanent Press cycle to improve
rinsing results while washing full loads (when more detergent is
used). NOTE: Recommended for those who have detergent
contact allergies.
nOn/Off Button (I) - Press this button to turn your washer-dryer ON or
OFF. "In" position, machine is ON. "Out" position, machine is OFF.
NOTE: Turning the appliance OFF does not cancel selected wash
program.
nStatus/Door Lock Lamp (L)
Flashes Slowly: Door can be opened. The appliance is on and
awaiting instruction or the cycle has ended.
Steady Light: Door lock is engaged / Program accepted.
Flashes quickly: Program has ended and door lock is engaged.
NOTE: Door may remain locked for up to 1-2 min. after end of cycle.
nAuto Dry Lamp (M) - Lights when the dry timer has been set and
following the wash cycle, the appliance will automatically run the
selected tumble drying cycle.
NOTE: Auto dry not available when Silk or Wool cycle is
selected.
A
with your
with your
with your
with your
with your

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wdc5200

Table of Contents