Limitations Of Use - 3M Adflo Nuisance Odor Pad Assembly User Instructions

Table of Contents

Advertisement

Available languages

Available languages

3
Nuisance Odor Pad Assembly
This product is part of a system that helps protect against certain airborne contaminants. Misuse may result in sickness or death. For
proper use, see supervisor, User Instructions or call 3M in U.S.A., 1-800-243-4630. In Canada call Technical Service at 1-800-267-4414.
FOREWARD
Contact Information
Read all instructions and warnings before using. Keep these User Instructions for reference. If you have questions regarding these products contact
3M Technical Service.
In United States:
Website: www.3m.com/workersafety
Technical Service: 1-800-243-4630
System Description
The 3M™ Adflo™ Nuisance Odor Pad Assembly is an optional accessory for the 3M™ Adflo™ PAPR. The nuisance odor* pad assembly helps to
reduce nuisance odors during cutting, burning and welding applications.
* NOTE: Nuisance odor refers to concentrations of organic vapors not exceeding the OSHA permissible exposure limit (PEL) or applicable government
occupational exposure limits, whichever is lower.
LIST OF WARNINGS WITHIN THESE USER INSTRUCTIONS
1. This product is one component of an approved respiratory protection system. Always read and follow all User Instructions supplied with your
3M™ Headgear and other system components in order to ensure correct system operation. Failure to do so may result in injury, sickness,
or death.
2. The 3M™ Adflo™ PAPR System is not intrinsically safe. Do not use in flammable or explosive atmospheres, doing so may result in serious
injury or death.
3. Always correctly use and maintain the filter assembly. Failure to do so may reduce respirator performance, overexpose you to contaminants,
and may result in sickness or death.
a. Inspect filter and filter seal before each use and immediately replace if damaged.
b. Always properly install the filter into the blower unit. Do not press on the filter grill when installing the filter into the filter cover. This may result
in damage to the filter membrane allowing hazardous particles to enter the breathing zone.
c. Keep filter seal clean.
d. Never attempt to clean filters by knocking or blowing out accumulated material. This may result in damage to the filter membrane allowing
hazardous particles to enter the breathing zone.
4. The nuisance odor pad should only be used for concentrations of organic vapors not exceeding the OSHA permissible exposure limit (PEL)
or applicable government occupational exposure limits, whichever is lower. Replace if smell or taste is detected. Use of the nuisance pad for
concentrations exceeding applicable exposure limits may result in sickness or death.
IMPORTANT:
Before use, the wearer must read and understand these User Instructions, the User Instructions for the 3M™ Adflo™ PAPR, and the User Instructions
for the intended headgear. Keep the User Instructions for reference. For proper use, see supervisor, refer to the product User Instructions or contact
3M Technical Service at 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.

LIMITATIONS OF USE

Operating Instructions
The nuisance odor pad assembly must always be used with the HE filter, pre-filter and spark arrestor. Do not use the nuisance odor pad assembly
alone or in combination with the Adflo OV/AG cartridge.
W WARNING
In Canada:
Website: www.3M.ca/Safety
Technical Service: 1-800-267-4414
W WARNING
1
(English)
User Instructions

Advertisement

Table of Contents
loading

Table of Contents