Advertisement
3.1
Drill-less Option
X
A
B
C
X
X
X
X
X
X
[Step 1] Remove face of tape (14) from mounting plate
(12), apply glue (25) as shown and slide plate over nipple
(13) through predetermined hole (A,B,C).
[Step 2] Press mounting plate onto finished wall. Level
plate before adhering to wall. Let glue cure for 48 hours
for complete result.
3.2
Drill Option
CAUTION: Live Plumbing
Place mounting plate (12) onto nipple (13), depending on
your desired height. Use plate as a guide, mark and drill
the holes deep. Insert anchors (15) into holes and secure
mounting plate (12) with screws (16). Level plate before
drilling. NOTE: anchors provided are for solid surface
walls; If you have fiberglass walls with no backing,
toggle anchors must be used (not included).
6
Installation Instructions
A
B
C
OR
4
Figure 1
A
B
C
Back of mounting plate
Connect main supply line (9) to brass nipple (13).
5
Mount shower system (1) onto mounting plate (12).
A
B
C
Advertisement
