Advertisement
1
Step 1
Step 2
Mixing valve
(NOT INCLUDED)
[Step 1] Apply a generous amount of PTFE (plumber's)
tape (24) to end of end of nipple (13).
[Step 2]Screw nipple (13) into fitting which old shower
arm was screwed into. Use allen wrench provided to
secure. DO NOT OVERTIGHTEN.
[Step 3] If needed, screw nipple extension (13A) into
pipe. Make sure 1/2" protrudes from finished
wall surface.
Installation Instructions
Step 3
[Step 1] Secure shower arm (2) onto unit by tightening
brass nut (6) on the back of unit.
[Step 2] Connect shower head supply line (8) to shower
arm (2).
2
Step 2
Back of Aloha
Step 1
5
Advertisement
