Table of Contents
Advertisement
▶
Terminal Type
To operate the system's console redrecton, you need a termnal supportng
ANSI termnal protocol and a RS-232 null modem cable connected between
the host system and termnal(s). Ths settng specfes the type of termnal
devce for console redrecton.
▶
Bits per second, Data Bits, Parity, Stop Bits
Ths settng specfes the transfer rate (bts per second, data bts, party,
stop bts) of Console Redrecton.
▶
Flow Control
Flow control s the process of managng the rate of data transmsson be-
tween two nodes. It's the process of adjustng the flow of data from one
devce to another to ensure that the recevng devce can handle all of the
ncomng data. Ths s partcularly mportant where the sendng devce s ca-
pable of sendng data much faster than the recevng devce can receve t.
▶
VT-UTF8 Combo Key Support
Ths settng enables/dsables the VT-UTF8 combnaton key support for
ANSI/VT100 termnals.
▶
Recorder Mode, Resolution 100x31
These settngs enable/dsable the recorder mode and the resoluton
100x31.
▶
Legacy OS Redirection Resolution
Ths settng specfes the redrecton resoluton of legacy OS.
▶
Putty Keypad
PuTTY s a termnal emulator for Wndows. Ths settng controls the nu-
merc keypad for use n PuTTY.
▶
Redirection After BIOS POST
Ths settng determnes whether or not to keep termnals?console redrec-
ton runnng after the BIOS POST has booted.
Industral Computer Board
Industral Computer Board
3-15
Advertisement
Chapters
Table of Contents
