Machine/Module Set-Up - Bernina Bernette Series Workbook

Workbook 4—Embroidery Basics
deco 340 Embroidery Machine
 Turn the machine OFF; insert the machine plug into
the machine. Note: The symbol "0" indicates the
switch is in the "off'" position.
 Connect the machine to a power outlet and turn it on.
Note: After turning on the power, it takes about six
seconds for the machine to boot up and the pattern
selection window to be displayed on the touch
screen.
bernette Chicago 7 Embroidery Machine

Remove the sewing table to the left side
 Move the feed dog control to lower the feed dog (b)
 Insert the embroidery module connection into the
machine connection port
 Push lightly until the module clicks into place
 Insert the plug into the embroidery module connector
of the machine, aligning the arrow on the plug (a)
with the arrow on the machine (b)
052815

Machine/Module Set-up

deco 340 Tips
 Always provide sufficient clearance for the
embroidery carriage behind your machine
before starting to stitch.
 Do not force to move the carriage by hand.

Return the carriage to the idle position before
turning the power off.
4