Bernina Bernette Series Workbook page 25

Workbook 4—Embroidery Basics
B 580
The B580 E rotates design in 1° increments using stitch width knobs or in
90° steps by touching the +90 rotate icon.
 Select indicated motif from Built-in Motifs (butterfly), Folder 3, Design 1.
 Select "i" or Edit icon; select the Move function.
 Using the Stitch Length and Width knobs (or touch motif on screen) move
design to upper left of the hoop. Touch Back arrow.
 Select duplicate > touch "I" on layer 2 > touch Move function > touch Center
 Touch Back > select Rotate > touch +90 icon one time > touch Back arrow >
select first motif on screen.
 Select Duplicate again > touch "I" on layer 3 > Select Rotate. Touch +90
icon two times > touch Back.
 Select Move Function > Use Stitch Length and Width knobs to position.

Select each motif to fine tune the positioning as shown.
 Touch Back arrow. Select Layer with All Motifs (no number).
 Select "I" > Select Move function > Touch Center > Touch Back arrow two
times.
 Touch Needle icon > OK.
B 560, 750 QE, 770 QE
 Select indicated motif:
560: Folder 2, Design 10
750 QE: Folder 1, Design 4
 Touch Hoop Selection icon; select Large Oval Hoop; activate Design Center
icon; close Hoop screen.
 Touch Rotate Motif; Touch 90º; close Rotate Motif screen.
 Touch Move Motif icon; rotate Stitch Length knob to move motif up 35 mm;
close Move Motif screen.
 Touch Needle icon; stitch motif; touch Green Check when finished.
 Touch Rotate Motif; Touch +90º two times until reading is 270; close Rotate
Motif screen.
 Touch Move Motif icon; rotate Stitch Length knob to move motif down 70
mm; close Move Motif screen.
 Touch Needle icon; stitch motif; Touch Green Check (B 770 QE -
Checkered Flag) when finished.
052815
Move, Rotate, Duplicate
B 560: Folder 2, Design 10
B 750 QE: Folder 1, Design 4
B 770 QE: Folder 2, Design 13
Folder 3
Motif 1—Floral
25