For Better Communications; Stopping Transmission - Fujitsu Stylistic Manual

FOR BETTER COMMUNICATIONS

This personal computer may not operate
properly due to the operating environment. It is
highly recommended that you observe the
following precautions when using your wireless
LAN module:
• For optimum wireless communications, it is
recommended that operation of the wireless
LAN module occur within 25 meters of the
Access Point. Wireless range is dependent
on a multitude of factors including number of
obstructions, walls, type of construction
material, reflective objects, etc..
• If the computer is unable to communicate
properly, change the channel to be used or
the installation location. During the use of a
microwave oven or other equipment
generating strong high-frequency energy, in
particular, the personal computer may be
highly susceptible to the energy and unable
to communicate properly.
• Broadcast stations or wireless
communication equipment that operate in
the 2.4GHz or 5GHz RF Frequency band
may interfere with the operation of the
wireless LAN module. Increasing of transmit
power or relocating Access Points may be
necessary to combat the effects of the
interference.
W i r e l e s s L A N U s e r 's G u i d e

STOPPING TRANSMISSION

To use this product inside hospitals, clinics, or
airplanes, or in other places where the use of
electronic equipment is regulated, stop the
transmission of radio waves from the wireless
LAN beforehand.
Deactivation using the wireless switch
The transmission of radio waves from the
wireless LAN can be stopped by setting the
wireless switch to the Off position. Note that
the wireless LAN On/Off switch has no effect
on non-wireless LAN models.
(See Figure 3 for Wireless LAN switch
location.)
Wireless LAN
On/Off
Switch
Figure 3. Wireless LAN On/Off Switch
49