Air Requirements - Graco 25C528 Instructions - Parts Manual

Air Air Line Air Line Accessories Line Accessories Accessories
Install the following accessories in the order shown
below, using adapters as necessary.
Air Shut Shut - - - off off Valve Valve
Air Air Shut off Valve
A bleed-type master air shutoff valve (A) for mounting
location) isolates the air line components for
servicing. An air shutoff valve should be installed in
the supply line and used to stop and start the agitator.
If the valve is installed, you do not need to set the
agitator speed each time it is used.
Order bleed-type air shutoff valves using the part
numbers listed below:
Table Table 2 2 2 Bleed Table Bleed Bleed- - - Type Type Shutoff Type Shutoff Valves Shutoff
Part Inlet/
No. Outlet npt
110223
110223 110223 1/4 (fxf)
110224
110224 110224 3/8 (fxf)
110225 110225 110225 1/2 (fxf)
110226 110226 110226 3/4 (fxf)
113163
113163 113163 1 (fxf)
107142
107142 107142 1/2 (mxf)
107141 107141 107141 3/4 (mxf)
Air Line Line Filter Filter
Air Air Line Filter
Air line filters remove harmful dirt, moisture, and oil
from the compressed air supply. Order part 106148
for 3/8 npt or 106149 for 1/2 npt.
Install an air line filter (AF) to remove contaminants
such as dirt, moisture, and oil from the compressed
air supply. Air line filters (AF) remove harmful dirt
and moisture from the compressed air supply. Order
part 106148 for 3/8 npt or 106149 for 1/2 npt. See
Installation, page 6 .
3A4792C
Valves Valves
Max WPR
Mate-
psi bar MPa
250 17.2 1.7 Brass
250 17.2 1.7 Brass
250 17.2 1.7 Brass
250 17.2 1.7 Brass
250 17.2 1.7 Brass
250 17.2 1.7 Brass
250 17.2 1.7 Brass

Air Requirements

Air Air Requirements
The air motor does not require lubricated air. See
Air Consumption, page 25
Connect the supply air to the inlet side of the air
regulator.
rial
Figure 8 Supply Air Hose Connection
Requirements
for requirements.
Installation
11