COMPONENTS AND KIT CONTENTS
SOLAR COLLECTOR KITS – CONETITE FITTINGS
For installation with a pumped open circuit solar water heater.
Your solar water heater is designed for the solar collectors to be roof mounted and
the solar storage tank to be installed at ground or floor level. The collector kits are
suitable for:
Collector Kit – Conetite Fittings 1 Collector (uncoated brass conetites)
12104793
LCS, TBT200 solar collectors
Collector Kit – Conetite Fittings 2 Collectors (uncoated brass conetites)
12104794
LCS, TBT200 solar collectors
Collector Kit –Conetite Fittings Additional Collector
(uncoated brass conetites)
12104795
LCS, TBT200 solar collectors
Note: One Additional Collector Kit is required for a third solar collector.
Warning: Only use components with cones of uncoated DR Brass as part of
an open circuit system. Coated brass cones must not be used.
Warning: This parts kit shall not be used with a solar collector with a steel
absorber plate. Use only with collectors which have copper waterways and
conetite style connections.
WARNINGS
4