USING THIS STATION
Communication using touch-to-talk
Touch-to-talk is a method of communication in which manual
control of incoming and outgoing audio is used. Touch-to-talk
is recommended in loud or noisy environments.
Tap
.
The touch-to-talk method is enabled.
To speak, tap
.
The
will change to
Door station audio is muted.
*
To listen, tap
.
The
will change to
*
Master monitor station audio is muted.
*
.
.
Recording
■ Automatic recording
The station automatically records video and sounds at the door
station after the elapse of a certain period of time after
receiving a call.
While recording,
The recording time is up to 10 seconds.
*
When the communication ends, the recording also ends.
*
NOTE:
Automatic recording cannot be cancelled.
•
Automatic recording does not begin while monitoring a door
•
station. To record video while monitoring, use the manual
recording method.
If answered with a mobile device during automatic image and
•
sound recording, the sound recording will end in the middle.
■ Manual recording
Video can be manually recorded during communication.
when a video is displayed.
Tap
REC
Manual recording is possible only when
*
the screen.
The recording quality is the same as automatic recording.
*
NOTE:
Manual recording cannot be performed during automatic recording.
More Information
•
The recordings are stored in a microSDHC card.
If a microSDHC card is not installed, recordings are saved in
the built-in memory. Up to 10 recordings can be saved in the
built-in memory.
•
The recording time is up to 10 seconds per recording.
•
The status LED will fl ash when there are recordings that
have not been played yet. The LED will turn off when the
MENU screen is shown.
•
Up to 1,000 recordings will be possible when using a
microSDHC card with enough capacity. When the number of
recordings is reached to the maximum, the oldest recording
will be deleted.
- 21 -
changes to
.
REC
REC
is shown on
REC