Connecting The Station With Wi-Fi; Connecting Using "Auto Connect (Wps); Connecting Using "Manual Setup - Aiphone JO-1MDW Operation Manual

PREPARATION

Connecting the station with Wi-Fi

There are two connecting methods available.
•
Auto Connect (WPS)
•
Manual Setup

Connecting using "Auto Connect (WPS)"

This method connects to a Wi-Fi network using the "Wi-Fi
TM
Protected Setup " function of a router/STB. Select this
method when it is not required detailed settings.
1
From the MENU screen, tap
→ Other Settings .
1
A message will appear asking whether or not to proceed.
2
To continue confi guring the settings, tap
3

Tap Network →
OTHER SETTINGS 1/2
Register / Delete apps microSDHC card
Video Quality Station Information
Network Default User Settings
1
>
→
2
3

→ Auto Connect (WPS) .
3
4
Press the WPS button on the Wi-Fi router, and

then tap
Connection between the master monitor station and
wireless router is established automatically. (In some
cases, it may be necessary to tap
the WPS button on the wireless router.)
When "The Wi-Fi router has been connected." is shown,
the connection is successful.
■ If the connection is failed
"Connection failed" will be shown.
Confi rm the current network settings and change the settings
properly. ( → P. 13)
If the connection cannot be established properly, use the
"Manual Setup" method.
If you connect the station to the Wi-Fi router by using the
*
"Auto Connect (WPS)" method after the IP address was set
by using "Manual Setup" method, initialization of the user
setting is necessary. ( → P. 36)

Connecting using "Manual Setup"

Select this method to confi gure the detailed settings.
. 1
From the MENU screen, tap
→ Other Settings .
A message will appear asking whether or not to proceed.
2
To continue confi guring the settings, tap
3
Tap Network
OTHER SETTINGS 1/2
2
Register / Delete apps
Video Quality
Network
1
- 11 -
.

before pressing
>
→

→ → Manual Setup .
microSDHC card
Station Information
Default User Settings
3

.
2