Advertisement
Quick Links
EvoRad2BT & EvoRad2BTA
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
As with all portable heating appliances - This product is only suitable for well insulated spaces or occasional use
08/53302/0 (UK)
Issue 5
The product complies with the European Safety Standards EN60335:2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014:1,
EN55014:2, EN61000:3-2 and EN61000:3-3 which cover the essential requirements of EMC Directive 2014/30/EU and the LVD Directive 2014/35/EU.
Advertisement
Related Manuals for Dimplex EvoRad Series
Summary of Contents for Dimplex EvoRad Series
- Page 1 EvoRad2BT & EvoRad2BTA THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE As with all portable heating appliances - This product is only suitable for well insulated spaces or occasional use 08/53302/0 (UK) Issue 5 The product complies with the European Safety Standards EN60335:2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014:1, EN55014:2, EN61000:3-2 and EN61000:3-3 which cover the essential requirements of EMC Directive 2014/30/EU and the LVD Directive 2014/35/EU.
- Page 2 LCD Display Bluetooth Neon Mode/Pair Programme Temperature Temperature Increase Decrease Heat Neon Mains neon Standby Selected Heat Cable wrap & Se ng plug storage Selected Desired Mode Temperature Manual Mode Auto Mode Time for next status change (ON at 15:20) Heat status Heat se ng Ac ve segment...
-
Page 3: Important Safety Advice
Warning: The heater complies with stringent safety Important Safety Advice standards but to ensure efficient operation SURFACES IMPORTANT: If the appliance is damaged, OF THE HEATER WILL BECOME HOT AND CONTACT WITH THESE AREAS SHOULD BE AVOIDED, particularly check immediately with the supplier before between the fins on the top and sides. -
Page 4: Initial Operation
Electrical Operational modes WARNING – THIS APPLIANCE MUST BE EARTHED The electronic control has four control modes: AUTO, MANUAL, BOOST and STANDBY mode (see Fig. 3) If the socket outlets in your home are not of the 13 amp In both MANUAL and AUTO mode there are three heat BS1363 type they will not accept the plug connected to this settings options (see Fig. - Page 5 Manual Operation Indicator Neons Repeatedly press the ‘ ’ button until the manual mode Mains On Neon: The mains neon, (see Fig. 1), remains is visible on the LCD and confirm the mode selection by illuminated when the power is supplied to the product. Note: pressing ENTER.
- Page 6 To facilitate this remote ‘On’ time, ‘Off’ time, Heat mode and set temperature. It is operation it is necessary to first download the Dimplex not necessary to set all four segments if not required. The app. The app is available on both android and IOS devices default setting is for all segments to be Off.
- Page 7 Safety in use Recycling This appliance incorporates a number of safety devices. For electrical products sold within the European In addition to the ‘Important Safety Advice’ section your Community. attention is drawn to the following; At the end of the electrical products useful life it should not be disposed of with household waste.
- Page 8 Operating Instructions supplied with the product. [c] Dimplex UK Limited All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex UK Limited.