Honda Insight 2020 Owner's Manual page 74

HANDLING THE UNEXPECTED
5. Take the tool case out. Take the
jack, jack handle bar, and wheel nut
wrench out of the tool case.
6. Unscrew the wing bolt, and remove the spacer cone. Then, remove the
spare tire.
7. Place a wheel block or rock in the
front and rear of the wheel diagonal
to the flat tire.
8. Place the compact spare tire (wheel
side up) under the vehicle body,
near the tire that needs to be
replaced.
140 |
9. Loosen each wheel nut about one
turn using the wheel nut wrench.
Do not use the jack if it doesn't work properly. Call your dealer or a
professional towing service.
The wheel nut wrench supplied with your vehicle is specially adapted to fit
the hoist shaft. Do not use any other tool.
Setting Up the Jack
n
1. Place the jack under the jacking
point closest to the tire to be
changed.
HANDLING THE UNEXPECTED
| 141