During Operation; Canceling Acc With Low Speed Follow; Switching To Standard Cruise Control - Honda Insight 2020 Owner's Manual

DRIVING

During Operation

n
ACC with Low Speed Follow monitors if
a vehicle ahead of you enters the ACC
with Low Speed Follow range. If a
vehicle is detected doing so, the ACC
with Low Speed Follow system
maintains or decelerates your vehicle's
set speed in order to keep the vehicle's
set following-interval from the vehicle
ahead.
If a vehicle detected ahead of you
slows down abruptly or if another vehicle cuts in front of you, the beeper
sounds and a message appears on the driver information interface.
ACC with Low Speed Follow has limited braking capability and may not
stop your vehicle in time to avoid a collision with a vehicle that quickly
stops in front of you.
Always be prepared to apply the brake pedal when conditions require.

Canceling ACC with Low Speed Follow

n
You can press the CANCEL button,
MAIN button, or the brake pedal. The
ACC with Low Speed Follow indicator
goes off.
Certain conditions may cause ACC with
Low Speed Follow to cancel
automatically. When this happens, a
beep sounds and a message appears
on the driver information interface.
Exiting a vehicle that has been stopped while the ACC with Low Speed
Follow system is operating can result in the vehicle moving without
operator control.
A vehicle that moves without operator control can cause a crash, resulting
in serious injury or death.
Never exit a vehicle when the vehicle is stopped by ACC with Low Speed
Follow.
116 |

Switching to Standard Cruise Control

n
Press and hold the Interval button for one second.
Cruise Mode Selected appears in the
driver information interface for two
seconds, and then the mode switches
to Cruise.
Press and hold the interval button for
one second to switch back to ACC with
Low Speed Follow. ACC Mode Selected
appears on the driver information
interface for two seconds.
DRIVING
| 117