Malfunction Indication Lamp (Check Engine Light); Anti-Lock Brake System (Abs); Low Tire Pressure / Tire Pressure Monitoring System (Tpms); Electric Power Steering (Eps) System - Honda Insight 2020 Owner's Manual

INSTRUMENT PANEL

Malfunction Indication Lamp (check engine light)

• After you have set the power mode to ON, the vehicle performs
system checks. However, if the readiness codes have not been
set by that time, this indicator will blink five times and then go off.
• Comes on if the fuel fill cap is loose or missing.
• Comes on if there is a problem with the emissions control system.
• Blinks when a misfire in the engine's cylinders is detected.
• Readiness codes are part of the on board diagnostics for the
emissions control systems.
• Comes on while driving - Have your vehicle checked by a dealer.
• Blinks while driving - Stop in a safe place where there are no
flammable objects. Stop the engine for 10 minutes or more, and
wait for it to cool down. Then, take your vehicle to a dealer.

Anti-lock Brake System (ABS)

There is a problem with the anti-lock brake system. Your vehicle still
has normal braking ability, but no anti-lock function. Have your
vehicle checked by a dealer.

Low Tire Pressure / Tire Pressure Monitoring System (TPMS)

• Comes on if the tire pressure of any of the tires becomes
significantly low.
• Blinks and then remains on: Have your vehicle checked by a
dealer. If the vehicle is fitted with a compact spare
regular tire repaired or replaced and put back on your vehicle as
soon as you can.
• One or more tires' pressures are determined to be significantly
low.
• The system has not been calibrated.
• Comes on while driving - Stop in a safe place, check tire
pressures, and inflate the tires(s) if necessary.
• Stays on after the tires are inflated to the recommended
pressures - The system needs to be calibrated.
®
Vehicle Stability Assist
Comes on if there is a problem with the VSA
• Stays on constantly - Have your vehicle checked by a dealer.
30 |
*1
, get your
®
(VSA ) System
®
.
*1 - If equipped

Electric Power Steering (EPS) System

Comes on if there is a problem with the EPS system.
Adaptive Cruise Control (ACC) with Low Speed Follow
• Comes on if there is a problem with ACC with Low Speed Follow.
• Comes on if the ACC with Low Speed Follow is deactivated
temporarily after the 12-volt battery has been disconnected, then
reconnected.
• Drive a short distance at more than 12 mph (20 km/h). The
indicator should go off. If it does not, have your vehicle checked
by a dealer.
• Indicator may come on temporarily when the Maximum Load Limit
is exceeded.
• ACC with Low Speed Follow has been automatically canceled.
• Make sure the total load is within the Maximum Load Limit.
• Stays on constantly - Have your vehicle checked by a dealer.
Safety Support System
• Comes on if there is a problem with the Road Departure
Mitigation or Collision Mitigation Braking System
vehicle checked by a dealer.
• Stays on constantly - Have your vehicle checked by a dealer.
• Indicator may come on temporarily when the Maximum Load Limit
is exceeded.
• Make sure the total load is within the Maximum Load Limit.
• Comes on if the RDM and CMBS
after the 12-volt battery has been disconnected and then
reconnected.
• Drive a short distance at more than 12 mph (20 km/h). The
indicator should go off. If it does not, have your vehicle checked
by a dealer.
• Comes on when RDM and/or CMBS
INSTRUMENT PANEL
TM
. Have your
TM
are deactivated temporarily
TM
shuts itself off.
| 31