Lucent Technologies INDeX 20AT User Manual page 23

Conference Calls
"No grand idea was ever
born in conference,
but a lot of foolish ideas
have died there"
F.Scott Fitzgerald 1945.
Setting the Ringer Timeout
Personal Alarms
38DHB0002UKDU - Issue 1 February 2000
During a call, other extensions can add callers to create a
conference call. They can setup conferences including up
to 64 parties(there are some limitations, consult your
System Manager for details). Standard phones cannot
start or add calls to a conference but can be included in a
conference.
To exit a conference:
1. Replace the handset. This does not affect any other
callers involved in the conference.
The ringer timeout controls several actions:
– Callback: How long a callback rings before cancelling.
– Group hunting: How long calls to a group of which you
are a member, ring before trying another member.
– Divert on no answer: How long calls ring at your phone
before the system uses Divert on No Answer if set.
To set the ringer timeout:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 13 (ringer timeout) .
3. Loud pip: Dial the phone's passcode (see page 22) .
You will then hear either:-
Continuous tone: Passcode wrong. Replace handset.
or
Three soft-tones: Timeout already set. Dial
or
Single soft tone: No timeout set. Dial a new timeout (0
to 999 seconds - 10 seconds
3 rings) and then dial #.
or
Broken dial tone: Ringer timeout set. Replace the
handset to finish.
You can set a Personal Alarm for your phone. When it
takes place, the phone will give a repeating triple ring for
20 seconds or until you lift and replace the handset.
– To set or alter an alarm:
Lift the handset and dial *8 hhmm # where hhmm is the
time in 24-hour clock format.
– To clear an alarm before it occurs:
Lift the handset and dial *8*#.
Conference Calls – Page 23
INDeX 20AT Telephone User's Guide
to cancel.