Rear Seat Belt Reminder Operation - Mazda 3 Facelift 2006 Training Manual

Body & Accessories
NOTE: The passenger seat belt warning light can be checked using the input/output check
mode for the instrument cluster.

Rear Seat Belt Reminder Operation

•
The seat belt reminder indicator activates all rear seat belt indicator lights after the
ignition is switched on, or when the rear seat belts are unfastened or fastened while the
engine is running. The colour of the indicator light provides information about the status
of the seat belts:
–
If the indicator light is illuminated in red, the corresponding seat belt is unfastened
(seat belt is unbuckled).
–
If the indicator light is illuminated in green, the corresponding seat belt is fastened
(seat belt is buckled).
•
In addition, the warning chime of the seat belt reminder indicator sounds for 0.5 s, when
a seat belt is unfastened while the engine is running.
•
The seat belt reminder indicator deactivates all rear seat belt indicator lights either 40 s
after engine start (i.e. after the generator warning light is off) or 40 s after the last
activation (in case the indicator lights have been activated while the engine is running).
Service Training Mazda3 F/L
Instrumentation/Driver Info
09-37