Temporarily Change The Setpoint Temperature Using T7525C/T7526C Thermostat Touchpads (Auto Changeover) - Honeywell T7525 User Manual

T7525/T7526 THERMOSTAT TOUCHPAD
Temporarily Change the Setpoint Temperature
Using T7525C/T7526C Thermostat Touchpads (Auto Changeover)
Base Screen with a Change Heat
o
Warmer
Set: C: 80
o
Actual: 80 Cooler
Options
Rate: NORMAL
12:25PM Mon Next
or Change Cool
Soft Key
First Options Menu
o
Warmer
Set: C: 80
o
Actual: 80 Cooler
Change Heat
12:25PM Mon Next
Second Options Menu
Options
Hold Temperature
More
Options
Run Schedule
Climate Control
Present Time/Day
Base Screen
More
69-0860—1
Step 1
You can temporarily change (override) the setpoint temperature. Follow these steps:
NOTE: To terminate this procedure, press the Back key within one minute. Screen
Select
displays the Base screen.
1. From the Base screen, press either the Warmer or Cooler soft key. The Options
Back
soft key becomes either a Change Heat or Change Cool soft key depending on
which set point type (H or C) is currently displayed.
M8625A
2. Press the Change Heat or Change Cool soft key until the desired setpoint type
(H or C) is displayed.
Steps 2 & 3
3. Press either the Warmer or Cooler soft key repeatedly until the desired setpoint
temperature displays. The setpoint temperature range is 45° to 88°F (7° to 31°C).
Select
NOTE: A minimum 3 degree F (2 degree C) deadband is maintained between
Back
M4469
4. To accept the change, press Select. If you press the Options or Next soft key or
do not press a key for one minute, the change will also be accepted. The screen
Step 4
displays the Base screen. The screen displays the Base screen. The screen
displays the actual temperature and the heating/cooling setpoint.
Select
NOTE: To accept the temporary setpoint change and perform another function,
Back
M8626A
The new temperature setting remains in effect until the next scheduled period or, if
Step 4
so configured, when the utility price rate changes.
The temporary change can be canceled and the system returned to the original
Select
setpoint temperature by pressing the Run Schedule soft key in the second
Options menu.
Back
M8627A
the heating and cooling setpoints. If either setpoint is adjusted into the
deadband, the other setpoint will automatically change to maintain the
minimum 3 degree F differential.
press the Options soft key. Screen displays the first Options menu. The
new temperature setting remains in effect until the next scheduled period
or, if so configured, when the unit price rate changes.
4
USING THE TOUCHPAD