Contents Set up and power Pair Pair your phone Pair your headset to the base OPTIONAL Dual pair your headset Charge Charge your phone Charge your headset Basics Headset and base controls Power on your headset Make, answer, end calls Volume Connect/Disconnect Switch audio...
Set up and power Using the illustration, set up the mobile phone station. Ensure the power cord is not under the foot of the base. FRONT BACK Next, slide the switch on your headset and power it on. OPTIONAL: Install a Kensington lock (port on the back) for security.
Pair The mobile phone station comprises three devices: 1) the base 2) the headset 3) your phone. The base and headset are already paired if purchased together. To use the base with your phone, pair your phone to the base. Pair your phone The base can pair with up to 8 Bluetooth devices, maintaining 1 active connection.
Charge Charge your phone The wireless charger is designed to support mobile phone wireless charging (landscape or portrait mode). Wireless charging: If your mobile phone supports wireless charging, align the phone (vertically or horizontally) to the left edge of the charge pad. WIRELESS CHARGING Wired charging: For wired charging, connect a charge cable (not provided) as shown.
Basics Headset and base controls Settings Media Volume wheel Rotate volume wheel to adjust volume Play/pause music, track forward/backward Press to play music ANC (Active Noise Canceling) Toggle on/off Mute (active call) and Open Mic (idle) button During a call, press to mute/unmute When not on a call, press Open Mic on/off Headset LEDs Flash when in use Call button Press to answer/end a call...
Redial To redial the last outgoing call, tap the base Call button or double press the headset Call button. Volume Press the +/– buttons on the base or rotate the volume wheel forward (+) or backward (–) on the headset to control the volume. Connect/Disconnect Connect: If your phone is paired to the base and you walk out of range of the base with your...
Page 8
To release the charge platform, pull the orange lever forward.
Microsoft Teams settings Media player settings View user guide *To change your headset language or settings, download Plantronics Hub here. **Automatic language/time/date sync is triggered by opening the Poly Elara app on your phone. Opening the app overrides any base menu settings.
Disable sensors You can disable your headset smart sensors several ways: • Manage sensors through Plantronics Hub software • Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue NOTE Sensors cannot be disabled while streaming audio.
Page 11
Once back in range with your phone or USB adapter, press the Call control button to exit DeepSleep mode.
Troubleshooting In the event of an electrostatic event The wireless charger resets within 45 seconds. When I use the media player with Elara and This is a known issue for iOS phones. YouTube, the media player freezes. Known issues with iPhone 5s •...
2019Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.