Usb-Related Settings; Setting The Usb Mode (Usb Mode); Specifying The Output Destination For Usb Audio Input; Usb Audio Routing - Boss RC-505 Owner's Manual

System Settings (Settings for the Entire RC-505)

USB-Related Settings

Here you can make USB-related settings for when the RC-505 is
connected to a computer via USB.
Reference
For details on USB connection, refer to "Connecting to Your
Computer via USB" (p. 26).
Parameter
Sys:USB Mode
Sys:USB Audio
Routing
Sys:USB IN Level
Sys:USB OUT
Level
24
Value

Setting the USB Mode (USB Mode)

STORAGE
Specifies how the RC-505 will operate when connected to your computer using a USB cable.
Reference
In order to use the RC-505's USB audio functionality, you must first install the USB driver in your computer. Refer
to "Installing the USB driver" (p. 26).
STORAGE
AUDIO/MIDI

Specifying the Output Destination for USB Audio Input

LOOP IN

(USB Audio Routing)

Specifies the output destination for the audio signal that is input from your computer via the RC-505's USB port.
LINEOUT,
SUB MIX
LOOP IN

Adjusting the USB Audio Input Volume (USB In Level)

100
Specifies the input volume of the audio signal that's input from your computer via the RC-505's USB port.

Adjusting the USB Audio Output Volume (USB Out Level)

100
Specifies the output volume of the audio signal that's output to your computer via the RC-505's USB port.
USB audio flow
RC-505
USB IN Level
USB OUT Level
Explanation
The RC-505 will be in USB mass storage mode, allowing you to transfer WAV files between the RC-505
and your computer.
The RC-505's USB audio/MIDI feature is available in this mode.
The audio will be output from the LINE OUT jacks and the PHONES jack.
* When "LINEOUT" is selected, the audio signal from USB IN is not outputted to USB OUT.
The audio will be input to the looper. It can be recorded.
USB Audio Routing
LINEOUT
SUB MIX
LOOP IN
Same output sound as the
LINE OUTPUT jacks
* The [OUTPUT LEVEL] knob does not affect USB audio (OUT).
To Looper