Device Management - Sony Ericsson P990i User Manual

Settings tab
– backlight switches on when you tap the
Auto
screen, press a key or receive an incoming call.
After a short time of inactivity the light switches off.
– backlight is always on, but after about a short
On
time of inactivity it fades to the dimmed level that
you can adjust on the Brightness tab.
Brightness tab
Select the backlight mode from the drop-down menu,
tap and adjust the level with the slider or the
Brightness
Jog Dial.
Select to reset all light levels to the factory
Default
values.

Device management

Device management enables the remote distribution of
settings for your phone, for example Internet, email,
SMS and MMS. It also makes it possible to manage (list,
install, update and uninstall) themes and client software
on the phones. Device management is useful if an
enterprise has, for example, defined a set of standard
software that should be used on all employees' phones.
124 Control panel
This is the Internet version of the user guide. © Print only for private use.
To enter the settings or manage software in the phone, a
device management session is setup between the phone
and a device management server. The session can be
initiated from the phone by you or from the server.
Device management dialog
Select
Tools > Control panel > Device > Device
. The device management server profiles,
management
if any, are listed. The profiles settings describe how the
profile will handle the start of a Device management
session and the notifications given during the session. In
the device management dialog you can:
• Initiate the phone management session by
highlighting a profile and selecting
• Create a new device management server profile
manually by selecting
• Initiate reconfiguration for a new operator by
selecting . This might be necessary if
Clear ACL
your phone is already configured for another
operator.
• Edit or delete device management server profiles.
Note: A profile may be locked by the operator. If it is,
you cannot edit or delete the profile or clear ACL.
The device management dialog consists of two tabs, the
tab and the
Details Settings
edit details for the connection, like user name for the
.
Connect
.
New
tab. In the tab you
Details
P990i