Table of Contents
Advertisement
2 When you use your Ericsson handsfree or mobile car kit, the
handsfree profile (
) is automatically activated (see "Auto
Activate" below).
You can also press and hold or
Note!
The Setup Wizard submenu allows you to quickly set up your
profile options according to preset specifications including Ring
Volume, Ring Sound, Key Sound, Message Alert, Screened Calls,
Answer Option, Add Area Code, Auto Prefix, Backlight, and Auto
Activate.
The Auto Activate submenu allows you to enable a profile
automatically. The two settings for Auto Activate are On and Off.
This setting is used for the Handsfree profile. You must be in
Handsfree profile to change selections.
Use the Reset Profile submenu to quickly return the currently active
profile to its original factory settings for every profile feature
throughout the menus. Press
settings. Your PIN is not reset.
My phone does not
Recharge or replace the battery.
turn On.
to change your profile.
to return the phone to its factory
<(6
My phone does not
Check for Ringer Off (
ring when a call is
(
) icons on the Standby screen.
received.
My battery does not
Your battery is fully charged when the
charge to full capacity.
power indicator shows the power icon
(
) continuously. If you still experience
problems, condition your battery by fully
discharging and charging it three times.
Or, if your phone came with a desktop
charger, use the conditioning function on
the desktop charger to condition the battery.
My signal strength
This is a common occurrence. Transmitters
varies.
are set in geographic areas, and coverage is
not 100% all of the time. Signal strength
varies as you travel between cells.
The signal is too weak to make a call. Try
again when the signal strength is one bar
or stronger.
The battery power is low. When the phone
shuts itself off, replace the battery with a
fully charged one, or use an alternate
power source, such as a travel charger.
Your phone is out of range of service.
) or Silent Mode
Advertisement
Table of Contents
