Handling Two Or More Calls - Sony Ericsson P910a P910a P910a User Manual

Sony ericsson cell phone user guide
Table of Contents

Advertisement

– Reject the call. The calling party will hear a busy
Send Busy
tone and the call will be logged as a rejected call.
– Silence the ring signal. The calling party will not
Mute
notice that you have silenced the call. The call will be logged
as a missed call.
You can also answer by voice control, see 'Voice control' on
page 52.
Options during or after a call
There are several options available, depending on the situation.
You can access some of them using the screen buttons, by
tapping the field with the calling party details, or on the menus.
Options that concern two or more active calls are described in
'Handling two or more calls' on page 45.
– End the active call.
End call
– Put the active call on hold/
New call/Hold call/Retrieve call
retrieve the held call.
– Create a new Contacts entry. This option
Add to contacts
appears automatically after a call if the phone number of the
call is known, and not already stored in Contacts. See 'Add to
contacts' on page 53.
– Display the entry in Contacts, if any, that
Show contact
corresponds to the phone number of the active call.
– Copy a phone number to the clipboard.
Copy number
Preliminary Layla850 P1B
Tap

Handling two or more calls

During a call, you can make a second call, or answer an
incoming call. The ongoing call is put on hold and the new call
becomes active. The held call is shown with a grey background.
If someone calls when a call is on hold, you will be asked if you
want to release the held call and answer the incoming call.
When an active call is finished, you are asked to retrieve the
held call. If you do not respond within a few seconds, the held
call will also be finished.
– Paste a copied number into a field
Paste number
to make the following adjustments:
– Adjust the volume in the phone. This is easier to
Call volume
do with the Jog Dial.
– Set when the vibrating alert should be active.
Vibrating alert
– All sounds, for example ring signals, will be
Silent mode
turned off.
– Activate the P910a as a speakerphone.
Speakerphone
– Turn the microphone on or off.
Mute microphone
Phone
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

P910a

Table of Contents