Sony Ericsson P800 User Manual page 22

This is the Internet version of the user's guide. © Print only for private use.
2. Push the release catch against the rounded edge below the
arrow. A distinct click will let you know that the key pad is
now attached correctly
3. Let the key pad stay fully opened. Place the cover plate in
position (see "To attach the flip replacement" on page 21).
Activating the virtual flip
You must activate the virtual flip, when you have removed the
flip keypad, to be able to open and close the virtual flip.
To activate the virtual flip
• Select
Control Panel > Device > Flip removed.
1. Tap the checkbox.
Enable virtual flip
2. Tap .
Done
22
Click
To de-activate the virtual flip
• Cancel the selection
Control Panel > Device > Flip removed.
1. Clear the checkbox.
Enable virtual flip
2. Tap .
Done
Virtual flip
When the flip is open, is shown on the status bar when the
virtual flip is enabled. Select
When the virtual flip is
"closed", the virtual flip
keypad is shown. Select
to open the virtual flip. You
can then continue working in
another application with the
flip open.
to "close" the virtual flip.
DEF
ABC
GHI MN O
JKL
PQRS
WXYZ
TUV
a/ A
Getting to know your P800