Table of Contents
Advertisement
Entering Two or More Characters
■
Assigned to the Same Key
After you enter the first character, press r and then enter
the next character.
Deleting Characters
■
To delete one character at a time, move the cursor to the
character you want to delete and then press C. To
delete all characters to the right of the cursor, hold down
C for at least one second. If there are no characters to
the right of the cursor, holding down C for at least one
second will delete all the characters.
Starting a New Line
■
Press #.
•
Certain functions such as C-mail do not support
entering new lines.
Entering E-mail Addresses
■
E-mail Address Compatible Characters
•
Before you enter an e-mail address, switch to the Single-
byte alphanumeric mode.
•
When changing your e-mail address, you can enter up
to 30 single-byte alphanumeric and symbol characters
for the account name (part to the left of @). Note the
following:
- Uppercase characters cannot be used.
- Period (.) or zero (0) cannot be used as the first
character.
How to Enter E-mail Addresses
■
Example: Entering "taro.23@kddi.co.jp"
Enter "taro.23".
t : Press 8 once.
a : Press 2 once.
r : Press 7 three times.
o : Press 6 three times.
. : Press 1 once.
2 : Press 2 once and then #.
3 : Press 3 once and then #.
➡
Enter "@".
@: Press 1 twice.
Enter "kddi" and then press c (OK).
➡
k : Press 5 twice.
d : Press 3 once and then r.
d : Press 3 once.
i : Press 4 three times.
23
Advertisement
Table of Contents
