Initial settings for e-mail and EZweb
Skip this section if you are not going to use either e-mail or EZweb.
If you are going to use e-mail or EZweb, you must make the initial settings.
Your e-mail address is automatically determined when you make the initial settings. You can
also change your e-mail address to any address you like after you have made the initial settings.
(See page 39.)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
1
Press q (mail) or e (EZ) in the standby
display.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2
2
Press p (ok).
Wait a short while until the display on the right appears.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
3
Press p (ok).
a If you started the initial settings by
pressing q (mail), the E-mail
menu appears. If you started the
initial settings by pressing e (EZ),
the EZ menu appears.
18
Update the
settings.
please be
patient...
Update is
complete.
E−mail menu M980
Create new
Inbox
Outbox
Check new mail
Data folder
Settings
Start by q
Format EZweb,
Press OK,
please wait
EZ menu M970
Top menu
Favorite list
Input to URL
Disp preview
Data folder
Screen memo
Reset
Start by e