Advertisement
L Bluetooth connection only possible in automatic mode, not
in manual mode like OPTIONS, etc.
Open the app and activate using one of the 3 commands,
†
¾
by pressing „Download"
„Upload"
▻ Device/device list appears on the display.
Device/device list appears on the display.
Device/device list appears on the display.
Press „Connect"
†
¾
For the twilight switch, press OK
†
¾
▻ The display shows BLUETOOTH ACTIVE
Press „Connect" in the app within 30 s
†
¾
Now, for example, projects can be created and uploaded.
Now, for example, projects can be created and uploaded.
Now, for example, projects can be created and uploaded.
Restarting the twilight switch
Press the 4 buttons simultaneously
†
¾
▻ You can choose between KEEP PROGRAM and DELETE
PROGRAM
, „Manual command"
or
6. Technical data
Operating voltage:
Frequency:
Brightness range:
On/off switch delay:
Standby:
Switch output:
Contact:
Max. switching capacity:
Switching capacity:
Min. switching capacity:
Power reserve:
Shortest delay time
Switching accuracy:
Software:
Rated impulse voltage:
Pollution degree:
Glow lamp load:
Halogen lamp load:
Fluorescent lamps KVG:
uncorrected:
series-corrected:
parallel-corrected:
Fluorescent lamps (EVB):
LED lamps (< 2 W):
LED-lamps (> 2 W):
Permissible ambient temperature:
Protection class:
Bluetooth OBELISK top3:
– Protection rating:
– Temperature:
– Range:
Protection rating:
device
Mounted light sensor
Installation light sensor
L The twilight switch display is only fully functional at tem-
peratures from +5 °C to +55 °C.
7. Contact
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Tel. +49 7474 692-0
Fax +49 7474 692-150
Hotline
Tel. +49 7474 692-369
hotline@theben.de
Addresses, telephone numbers etc.
www.theben.de
110–230 V AC, +10 % / –15 %
50–60 Hz
1–99,000 lx
0–59 min
0,8 W
Switching of any external con-
ductor is permitted
µ-contact, two way switch
16 A (at 250 V, cos ϕ = 1)
10 A (at 250 V, cos ϕ = 0.6)
10 mA/230 V AC
100 mA/24 V AC/DC
10 years
1 s
To the second
Class A
4 kV
2
2600 W
2600 W
2600 VA
2600 VA
1300 VA (130μF)
1100 W
50 W
600 W
–25 °C ... +55 °C,
–40 °C ... +70 °C (sensor)
II (light sensors III) if correctly
mounted
IP 40
–30 °C ... +55 °C
15 m on open air test site
IP 20
IP 55
IP 66 (frontside, when installed)
IP 40 (backside)
8
Advertisement
