Sony PDW-530 Operation Manual page 97

U03 FUNCTION1
ASSIGN SW <1>
ASSIGN SW <2>
ASSIGN SW <3>
ASSIGN SW <4>
TURBO SW
DF/NDF
CACHE/INTVAL
The FUNCTION 1 page contains the following items.
Item Description
ASSIGN SW 1 Assigns the function to ASSIGN 1
(push-type) switch.
ASSIGN SW 2 Assigns the function to ASSIGN 2
(slide-type) switch.
ASSIGN SW 3 Assigns the function to ASSIGN 3
(push-type) switch.
ASSIGN SW 4 Assigns the function to ASSIGN 4
(push-type) switch.
3
Turn the MENU knob to move the b mark to the item
corresponding to the switch to which you want to
assign the function, and press the MENU knob.
The corresponding ASSIGN SW SEL window
appears.
ASSIGN <1/3/4> SEL window
ASSIGN SW1 SEL ESC
OFF
PICTURE CACHE ON/OFF
TEST OUT CHARACTER
MARKER
RE-TAKE
ATW
RETURN VIDEO
LENS RET
REC SWITCH
TURBO SWITCH
ASSIGN <2> SEL window
ASSIGN SW2 SEL ESC
OFF
PICTURE CACHE ON/OFF
TEST OUT CHARACTER
MARKER
ZEBRA
FREEZE MIX
FREEZE MIX(Manual)
D5600
EXT REC CONTROL
Functions to be assigned to the ASSIGN 1/3/4
(push-type) switch
Function Description
OFF Disables the switch.
TEST OUT Assigns the function to switch whether or
CHARACTER not text is superimposed on the video
signal to be output from the TEST OUT
connector.
MARKER Assigns the ON/OFF function to display
all markers.
TOP
: ATW
: OFF
: OFF
: OFF
: TURBO
: DF
: OFF
1)
Function Description
ATW Assigns the ON/OFF function of auto-
tracing white balance.
RETURN VIDEO Assigns the ON/OFF function to display
the image of the return video signal on
the viewfinder to the switch.
LENS RET Assigns the same function as that of the
RET switch on the lens to the switch.
REC SWITCH Assigns the VTR S/S (start/stop) function
to the switch.
TURBO Assigns the turbo gain function to the
SWITCH switch.
ZEBRA Assigns the zebra pattern display
function to the switch.
FREEZE MIX Outputs the freeze image and camera
input alternately, to allow frame alignment
(automatic switching).
FREEZE MIX Outputs the freeze image and camera
(Manual) input alternately, to allow frame alignment
(manual switching).
D5600 Applies an electrical 5600 K filter.
ZOOM TELE/ When using a serial lens, assign the
3) ZOOM TELE setting to ASSIGN 3, and
WIDE
the WIDE setting to ASSIGN 4.
ZOOM WIDE/ When using a serial lens, assign the
3) ZOOM WIDE setting to ASSIGN 3, and
TELE
the TELE setting to ASSIGN 4.
4) Assigns the items assigned in the
UA01 to UA10
ASSIGN SEL menu.
1) Even when the MARKER item is set to "OFF" on the MARKER page of
the USER menu, the ASSIGN 1/3/4 switch allows you to display or not to
display all markers.
2) Even if the RETURN VIDEO item is set to "OFF" on the GENLOCK page
of the MAINTENANCE menu, you can use this switch to display the
image of the return video signal on the viewfinder.
3) Only the Assign 3SEL and Assign 4 SEL screens appear.
4) This does not appear if nothing is assigned in the Assign menu.
Functions to be assigned to the ASSIGN 2 (slide-
type) switch
Function Content
OFF Disables the switch.
TEST OUT Assigns the function to switch whether or
CHARACTER not the characters are mixed to the video
signal to be output from the TEST OUT
connector.
MARKER Assigns the ON/OFF function to display
all markers.
ZEBRA Assigns the zebra pattern display
function to the switch.
D5600 Applies an electrical 5600 K filter.
EXT REC Selects whether or not recording control
CONTROL of external devices connected through
the i.LINK connector or the CCZ
connector (26-pin) of a CA-702 is
possible.
6-3 Adjustments and Settings from Menus
2)
1)
97