Sony PDW-530 Operation Manual page 86

To select the items to be displayed on the viewfinder
screen, proceed as follows.
MENU knob
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the VF DISP 1 or VF DISP
2 page appears, and press the MENU knob to select the
page.
U04 VF DISP 1
VF DISP
VF DISP MODE
DISP EXTENDER
DISP FILTER
DISP WHITE
DISP GAIN
DISP SHUTTER
DISP AUDIO
DISP DISC
DISP IRIS
VF DISP 1 page
You can select the following items to be displayed on
the screen on the VF DISP 1 or VF DISP 2 page.
VF DISP 1 page
Item Description
VF DISP Turning on or off the viewfinder
display
VF DISPLAY MODE Selecting the display mode
DISP EXTENDER Extender indicator
DISP FILTER Types of the ND filter
DISP WHITE White balance memory indicator
DISP GAIN Gain indicator
DISP SHUTTER Shutter speed and ECS mode
indicator
DISP AUDIO Audio level indicator
DISP DISC Remaining disc capacity indicator
DISP IRIS Iris opening indicator
1) The viewfinder display can be also turned on or off by using the DISPLAY
switch on the viewfinder.
86
6-2 Status Display on the Viewfinder Screen
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch
: ON
: 3
: ON
: ON
: ON
: ON
: ON
: ON
: ON
: ON
1)
2)
2) For detailed information on the display mode, see 6-2-3 "Display Modes
and Setting Change Confirmation/Adjustment Progress Messages" on
page 87.
VF DISP 2 page
Item Description
DISP ZOOM Zoom position indicator
DISP COLOR Displays the color temperature.
TEMP.
DISP BATT Displays the battery voltage/
1) remaining capacity of an internal
REMAIN
battery pack or an external battery
connected to the DC IN connector.
DISP DC IN Displayed when the power is supplied
from an external battery connected to
the DC IN connector.
DISP 16:9/4:3 ID Displays the 16:9/4:3 mode indicator.
DISP WRR RF LVL Displays the reception level of the
wireless microphone.
DISP TIME CODE Displays the time code.
DISP REC FORMAT Displays the recording format.
1) When an Anton Bauer Intelligent Battery System or the BP-IL75/GL95/
M100 battery pack is used, the setting of this item determines the display
as follows.
INT: The remaining battery capacity is shown as a percentage when there
is a change, and when the capacity is low.
AUTO: The remaining battery capacity is shown as a percentage, except
that when this is impossible the battery voltage appears.
VOLT: The battery voltage is shown.
3
Turn the MENU knob to move the b mark to the item
you want to set, and press the MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether the selected
item should appear in the viewfinder display (the
"ON" setting), or not appear (the "OFF" setting), and
press the MENU knob.
The z mark on the left of the selected item changes a
the b mark and the ? mark on the left of the setting
changes to a z mark.
Note that pressing the CANCEL/PRST / ESCAPE
switch to CANCEL/PRST on this page has no effect.
5
To set another item to "ON" or "OFF", repeat steps 3
and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.