Advertisement
Hardware & Software
Installation
Installation Overview
Once you have determined that your system meets the recommended minimum
requirements, perform the following tasks to install your new graphics card.
Detailed installation instructions are provided in the following sections.
If replacing an existing graphics card, uninstall the old graphics driver and software
before installing the new Radeon VII graphics card.
NOTE: If you are using a motherboard containing an on-board graphics solution and do not intend to
use it as part of a multiple monitor configuration, disable it.
1.
Turn off and disconnect your computer system from AC power.
2. If needed, remove any existing graphics card(s).
3. Install the new graphics card.
4. Reassemble and connect your computer system and display(s).
5. Start the computer system, install the AMD drivers and configuration software.
6. Restart the computer system.
Installing the Graphics Card
Power Connection Location
1.
Power supply.
2. Graphics card.
CAUTION:
Wait approximately 20 seconds after
unplugging the power cord before
disconnecting a peripheral cable or removing
a component from the motherboard to
avoid possible damage to the motherboard.
3
Advertisement
