Attaching Ribbing - Singer QuantumLock 14T957DC Workbook

Four-Thread Ultra-Stretch Mock Safety Stitch
This stitch works well when applying ribbing to a garment. Ribbing is often
seen on cuffs, collars and waistbands of active wear. Because the stitch
stretches with the fabric, the seam will not break when the fabric is
stretched.
Example:
The seam and edge finish for joining ribbing to fleece on a baby's bunting
jacket.
Directions:
Set for the Four-Thread Ultra-Stretch Mock Safety Stitch. Place ribbing on
top of fleece and sew. While sewing, stretch the ribbing as needed.
Needle set up:
Back Overedge Left
Needle (Orange)
Back Overedge
Right Needle (Blue)
Left Cover Stitch
Needle (Green)
Upper Looper
(Green)
Lower Looper
(Red)
Chain Stitch unthreaded
Looper (Brown)
Upper Knife Engaged
Seam Guide Plate Removed
Seam Width Dial
Differential Feed
Dial
Presser Foot
Pressure
Stitch Length Dial
Stitch Finger
4.0
4.0
4.0
4.0
N
N
N
N
N
8.