Sony SCPH-30001 R Instruction Manual page 19

Setting viewer options
(Custom Setup)
"Custom Setup" allows you to set the playback
conditions.
The default settings are underlined.
Select "Custom Setup" in the Setup display.
x Pause Mode
Selects the picture in pause mode.
• Auto : A picture, including subjects that
move dynamically, is output without any
jitter. Normally select this position.
• Frame : A picture including subjects that do
not move dynamically is output with high
resolution.
x Parental Control
Playback of some DVDs can be restricted.
The Parental Control function allows you to set
a playback restriction level and a password to
prevent children from viewing certain content.
Select "Custom Setup" in the Setup display.
1
Select "Parental Control" using the
......
directional buttons, then press the ✕
button.
x When you have not entered a password
The display for entering a password
appears.
x When you have already registered a
password
The display for confirming the
password appears. Skip step 2.
2
Enter a password in 4 digits using the
......
number buttons.
3
To confirm your password, enter it again
......
using the number buttons.
You can set the Parental Control level and
change the password.
4
Select "Region" using the directional
......
buttons, then press the ✕ button.
5
Select a geographic region to set the
......
standard Parental Control level for that
region using the directional buttons, then
press the ✕ button.
6
Select "Level" using the directional
......
buttons, then press the ✕ button.
7
Select the level you want using the
......
directional buttons, then press the ✕
button.
The lower the value, the more strict the
restriction.
To turn off the Parental Control function
and play the DVD after entering your
password
Set "Level" to "Off" in step 7, then press the ✕
button.
To change the password
1
After step 3, select "Change Password"
......
using the directional buttons, then press
the ✕ button.
The display for changing the password
appears.
2
Follow steps 2 and 3 to enter a new
......
password.
Playing a disc which is protected by
Parental Control
1
Insert the disc and press the START
......
button.
The Parental Control display appears.
2
Enter your 4-digit password using the
......
number buttons.
The DVD player starts playback.
When you stop playing the DVD, the
Parental Control level returns to the
original setting.
If you forget your password
Press the SELECT button and enter the 4-digit
number "7444" whenever the Parental Control
display asks you for your password. The old
password is deleted.
Notes
• When you play DVDs that do not have the Parental
Control function, playback cannot be restricted on this
DVD player.
• If you do not set a password, you cannot change the
Parental Control settings.
• Depending on the DVD, you may be asked to change
the Parental Control level while playing the disc. In
this case, enter your password, then change the level.
When you stop playing the DVD, the Parental Control
level returns to the original setting.
After changing DVD settings
To save your changes, be sure to eject the DVD
before pressing the 1/RESET button or
turning off the unit with the MAIN POWER
switch. Please note that changes will not be
saved if you reset or turn off the console
without first ejecting the DVD.
19
US