Table of Contents
Advertisement
Controlling Audio
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the <EQ> button.
2
See the below for each operation method.
Controlling General Audio
1
Press the <EQ> button.
2
Touch [Fader / Balance].
3
Set each item as follows.
[Fader Balance]
Adjust the left and right volume
Balance
balance.
[U] [T]
15 (right) to 15 (left)
Adjust the front and rear volume
Fader
balance.
[R] [S]
15 (front) to 15 (rear)
[INITIALIZE] To clear the adjustment.
[Listening Position]
Select a listening position from "Front
[.]
Left", "Front All", "Front Right", and
"Middle".
[INITIALIZE] To clear the adjustment.
Equalizer Control
1
Press the <EQ> button.
2
Touch [Equalizer].
3
Set each item as follows.
1
2
1 You can select frequency bar and adjust its level.
(-9 to +9)
• The adjustments are stored.
2 To recall the preset equalizer curve.
3 Recalls the memorized EQ curve.
4 Initialize the current EQ curve.
Speaker / X'Over setup
1
Press the <EQ> button.
2
Touch [Speaker / X'Over].
3
Touch the speaker to set up.
4
Set each item as follows.
[ON] : Filter adjustment.
Mode
[OFF] : Turns off the filter.
[OFF], [ON]
Set a crossover slope.
Slope
[R] [S]
• High Pass Filter adjustment. (When
Frequence
Front or Rear is selected)
[R] [S]
• Low Pass Filter adjustment. (When
Subwoofer is selected)
Adjust the gain of the front speaker,
Level
rear speaker, or subwoofer.
[R] [S]
Set the phase of subwoofer output.
Phase
[
] to shift the phase 180 degrees.
Inversion
(When Subwoofer is selected)
To clear the adjustment.
[INITIALIZE]
4
3
English |
17
Hide quick links:
Advertisement
Table of Contents
