Bluetooth; Register Your Smartphone To The Unit; Bluetooth Setup - JVC KW-M150BT Instruction Manual

Bluetooth

Bluetooth
Ñ About the Bluetooth smartphone and
Bluetooth audio player
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Ver.4.2
Profile
Smartphone/ Cell-phone:
HFP (V1.6) (Hands Free Profile)
PBAP (Phonebook Access Profile)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (V1.5) (Audio/Video Remote Control Profile)
Sound codec
SBC
Ñ About mobile phones compatible with
Phone book Access Profile (PBAP)
If your mobile phone supports PBAP, you can
display the following items on the touch panel
screen when the mobile phone is connected.
• Phone book (up to 1000 entries)
• Dialed calls, received calls, and missed calls (up to 50
entries in total)
Register your smartphone to the
unit
You can use your Bluetooth smartphone when
paired to this unit.
You can register up to 8 Bluetooth devices.
• You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires
confirmation.
• One device can be connected at a time.
• When you register a new Bluetooth device,
disconnect the Bluetooth device currently
connected and then register the new device.
• A new device cannot be registered if there are 8
registered Bluetooth units. Delete unnecessary
registration. (P.14)
1
Turn on the Bluetooth function on your
smartphone/cell-phone.
2
Search the unit ("KW-M150BT") from your
smartphone/cell-phone.
If a PIN code is required, enter the PIN code
("0000").
• appears when the Bluetooth smartphone is
connected.
14
Ñ Disconnecting the device
• Turn off the Bluetooth function from your
smartphone/cell-phone.
• Turn off the ignition switch.

Bluetooth Setup

1
Press the < > button.
2
Touch [Setting].
3
Touch [Bluetooth].
4
Touch the corresponding key and set the value.
[Select Device]
Connect the Bluetooth device.
[Phone Auto Answer]
Set the automatic response time to pick-up an
incoming call.
"OFF" (Default) / "ON"
[Device Name]
The Bluetooth device name of this unit is displayed.
[Pin Code]
Displays the PIN code.
[Device address]
Displays the device address.
Ñ Connect the Bluetooth device
1
Touch [Select Device] on the Bluetooth Setup
screen.
2
Touch [ ] of the device you want to connect.
To delete the registered Bluetooth device
1
Touch [ ] on the Select Device screen.