Table of Contents
Advertisement
OPERATION
high field strength, if the real AF is
wrongly masked as DIP by some
interference, the unit hesitates to
search real Afs. For this reason, the
unit has the user option (MASK DPI)
which doesn't mask the AF of NO
RDS signal with high field strength.
In MASK DPI mode, the wrong
sound or long mute (according to PI
SOUND or PI MUTE) can be heard
from the AF station which has NO
RDS signal and of which the field
strength is higher than that of the
currently tuning AF (station).
But, these phenomenon are rare
and the user will hardly hear the
wrong sound in whole Europe.
- MASK DPI mode:
Masked only the AF which has
different PI.
- MASK ALL mode:
Masked the AF which has
different PI and NO RDS signal
with high field strength.
e) BEEP 2'ND, BEEP ALL, BEEP OFF
mode
The situation of beep sound is
selected.
The 3 mode is selected as also by
VOL(
/ ) / (11&12) button.
- BEEP 2'nd mode:
The beep is only generated when
all allowed double key is pressed
long (1 sec).
e.g.
When preset button (14) is
pressed.
When BND/LOU button (13) is
pressed.
When AMS button (18) is
pressed.
- BEEP ALL mode:
The beep is generated when
every key is pressed.
- BEEP OFF mode:
The beep is disabled.
• LOUDNESS
Press BND/LOU button (13) for several
seconds to reinforce the bass output.
Press it for several seconds again to
release this function.
• DISPLAY
Press DSP button (15) to operate as
the conversion of each display mode
as follows:
- In case of receiving a RDS station
In radio mode:
-> PS -> CT -> FREQ. -> PTY ->
In AUX IN mode:
-> AUX -> CT -> PS -> FREQ. ->
PTY ->
In CD mode:
-> CD -> CT -> PS -> FREQ.
-> PTY ->
- In case of no receiving CT or PTY
information, the display shows as
"NO CLOCK" or "NO PTY".
- In case of receiving a non RDS station
In radio mode:
-> "NO CLOCK" -> FREQ. ->
"NO PTY" ->
In AUX IN mode:
-> AUX -> CT -> FREQ. ->
"NO PTY" ->
In CD mode:
-> CD (MP3) -> CT -> FREQ. ->
"NO PTY" ->
Each displaying time is several
seconds, and come back to 1'st
position after several seconds.
Notes:
- CT = clock time
- FREQ. = frequency
• MUTE
Press MUT button (2) to mute down
the sound instantly. If any button
(except
button) is pressed in the
mute state, the mute mode is released.
When PTY or TA is received, the mute
mode is also released.
9
Advertisement
Table of Contents
