Additional Connections - Sony SLV-SE610K Operating Instructions Manual

Additional connections

To a stereo system
(not available on
SLV-SE610N/K)
You can improve sound
quality by connecting a
stereo system to the
L/G jacks as shown on the
right.
To a satellite or digital
tuner with Line Through
(not available on
SLV-SE610N/K)
Using the Line Through
function, you can watch
programmes from a satellite
or digital tuner connected to
this VCR on the TV even
when the VCR is turned off.
When you turn on the
satellite or digital tuner, this
VCR automatically sends the
signal from the satellite or digital tuner to the TV without turning itself on.
1
Connect the satellite or digital tuner to the DECODER/LINE-3 IN*
DECODER/LINE-2 IN*
2
Set DECODER/LINE3*
LINE2*
3
Set POWER SAVE to OFF or PARTIAL*
4
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a satellite or digital programme.
1
* SLV-SE810N/K only
* 2 SLV-SE710N/K and SX710N/K only
3
* not available on SLV-SE610N/K
18
Connecting the VCR
R/D
2 ) connector as shown above.
1 (or DECODER/LINE2*
2
) in the OPTIONS-2 menu.
R/D L/G
Audio cable (not supplied)
: Signal flow
DECODER/
t LINE-3 IN*
1
or DECODER/
t LINE-2 IN*
2
Scart cable (not supplied)
: Signal flow
2
3 in the OPTIONS-2 menu.
LINE IN
LINE OUT
1 (or
) to LINE3* 1 (or