Adjusting The Picture - Sony SLV-SE430K Operating Instructions Manual

Adjusting the picture

Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press PROGRAM +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re-
insert it.
Adjusting the picture sharpness (Smart trilogic)
You can automatically adjust the sharpness of the picture.
1 During playback, press MENU, then press M/m/</, to highlight
USER SET and press OK.
2
Press M/m to highlight SMART
TRILOGIC, then press ,.
3
Press M/m to set SMART TRILOGIC to
ON or OFF.
• ON: Picture sharpness is automatically
• OFF: Adjust the picture sharpness
4
Press MENU to return to the original screen.
68 Adjusting the picture
adjusted.
manually.
To soften the picture, press <.
To sharpen the picture, press ,.
TRACKING – – – – – – – – – – – –
Tracking meter
OSD : ON
TAP E SELECT : E
COLOUR SYSTEM : AUTO
FORMAT 1 6 : 9 : AUTO
NICA M : ON
POWER S AVE : OFF
SMART TRILOGIC : ON
SEL ECT : S ET
END : OK E XIT
PICTURE
S MART TRILOGIC : OFF
SOFTEN SHARPEN
– – – – – – – – – – – – – – – – – – – – –
ON/OFF : S ET
END : OK EX IT
1 8 0
:
: ME NU
:
: ME NU