Step 4 : Setting Up The Vcr With The Auto Set Up Function - Sony SLV-SE430K Operating Instructions Manual

Step 4 : Setting up the VCR with the Auto
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the language for the on-screen display, TV
channels, guide channels for the ShowView system*, and VCR clock* automatically.
1
2
3
OK
20 Setting up the VCR with the Auto Set Up function
Set Up function
Turn on your TV and set it to the video channel.
If your TV does not have a Scart (EURO-AV) connector, tune the
TV to channel 32 (the initial RF channel for this VCR). Refer to
your TV manual for TV tuning instructions. If the picture does not
appear clearly, see "To change the RF channel" on page 22.
Connect the mains lead to the
mains.
The VCR automatically turns on,
and the language abbreviations
appear on the TV screen.
The abbreviations of the
languages are as follows:
Abbreviation
CZ
HU
PL
SK
TR
RU
Press M/m/</, to select the language abbreviation from the table
in step 2, then press OK.
The message for the Auto Set Up function appears.
Country Language
Czecho Czech
Hungary Hungarian
Poland Polish
Slovakia Slovak
Turkey Turkish
Russia Russian
GB RU
CZ HU
TR
SEL ECT :
SET : OK E XIT
PL
SK
: ME NU