Sony SLV-SE210D Operating Instructions Manual page 37

2
Press the programme number
1 2 3
buttons to enter the ShowView
4 5 6
number.
7 8 9
If you make a mistake, press
0
CLEAR and re-enter the correct
number.
CLEAR
3
Press OK.
The date, start and stop times,
PLAY
programme position, and VPS/PDC
OK
setting appear on the TV screen.
• If "– –" appears in the "PR"
INPUT
SELECT
CLEAR
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the dated, and
the VPS/PDC setting:
PLAY
1 Press </, to select the item
OK
2 Press M/m to reset it.
• To record the same programme
• To use the VPS/PDC function, set
5
Press MENU to exit the menu.
MENU
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press M/m to select the desired programme position.
To record from a decoder or other source connected to the input
connector, press INPUT SELECT to display the connected line in
the "PR" position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
you want to change.
every day or the same day every
week, see "Daily/weekly
recording" on page 38.
V/P to ON. For details about the VPS/PDC function, see "Timer
recording with VPS/PDC signals" on page 38.
Recording TV programmes using the ShowView system (SLV-SE210D only)
S HOWVIEW
CODE 1 2 3 4 – – – – –
CODE : 0 – 9
S ET : OK EXIT
2 8 / SE P FRI
PR DA Y START STOP
3 5 S A 2 9 1 9 : 0 0 2 0 :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
SELECT : SET
END : OK EXIT
2 8 / SEP FRI
P R DAY START STOP
3 5 S A 2 9 1 9 : 0 0 2 0 :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
– – – – – – – – : – – – – :
S ELECT : SET
E ND : OK EXIT
continued
: MENU
1 8 : 3 0
V/P
0 0 –
– – –
– – –
– – –
– – –
– – –
:
: MENU
1 8 : 3 0
V/P
0 0 ON
– – –
– – –
– – –
– – –
– – –
:
: MENU
37