Sony SLV-M20HF Operating Instructions Manual page 16

Setting the timer manually (continued)
2
• CURSOR
PUSH OK
INPUT
SELECT
3
• CURSOR
PUSH OK
4
• CURSOR
PUSH OK
5
• POWER
16
Basic Operations
Set the date, start and stop times, channel
number and tape speed:
1 Push the cursor stick to / to highlight
each item in turn.
2 Push the cursor stick to ./> to set each
item.
To correct a setting, push the cursor stick
to ? to return to that setting and reset.
To record the same program every day or the same day every week,
push the cursor stick to . while the date is highlighting. For
details, see "Daily/weekly recording" on the next page.
To record from a source connected to the LINE–1 IN or LINE–2 IN
jacks, press INPUT SELECT to display "LINE1" or "LINE2" in the
"CH" position.
Push the cursor stick to / to confirm the setting.
The cursor appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
Press the cursor stick (OK).
Press POWER to turn off the VCR.
The indicator appears in the display window and the VCR
stands by for recording.
When using a cable box, leave it on.
TIMER SET / CHECK 11 / 16 MON
DATE START STOP CH
– : – – – : – –
11 / 1 8 WED – – EP
– : – – – : – –
– – / – – – –
– : – – – : – –
– – / – – – –
– : – – – : – –
– – / – – – –
– : – – – : – –
– – / – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– : – – – : – –
– – / – – – –