Display Ntp-Service Trace - H3C S5500-EI Series Command Manual

Command Manual – NTP
H3C S5500-EI Series Ethernet Switches
Table 1-2 Description on the fields of the display ntp-service status command
Field
Clock status
Clock stratum
Reference clock
ID
Nominal
frequency
Actual frequency
Clock precision
Clock offset
Root delay
Root dispersion
Peer dispersion
Reference time

1.1.3 display ntp-service trace

Syntax
display ntp-service trace
View
Any view
Parameters
None
Description
Use the display ntp-service trace command view the brief information of each NTP
server along the NTP server chain from the local device back to the primary reference
source.
Status of the system clock
Stratum level of the local clock
After the system clock is synchronized to a remote time server
or a local reference source, this field indicates the address of
the remote time server or the identifier of the local clock source:
When the local clock has a stratum level of 1, the value of
this field is "LOCL";
When the local clock has another value, the value of this
filed is the IP address of the local clock).
The nominal frequency of the local system hardware clock
The actual frequency of the local system hardware clock
The precision of the system clock
The offset of the system clock relative to the reference source
The roundtrip delay from the local device to the primary
reference source
The maximum error of the system clock relative to the primary
reference source
The maximum error of the system clock relative to the reference
source
Reference timestamp
1-4
Chapter 1 NTP Configuration Commands
Description