Chapter 1 Ntp Configuration Commands; Ntp Configuration Commands; Display Ntp-Service Sessions - H3C S5500-EI Series Command Manual

Command Manual – NTP
H3C S5500-EI Series Ethernet Switches

Chapter 1 NTP Configuration Commands

Note:
The local clock of an S5500-EI Ethernet switch cannot be set as a reference clock. It
can serve as a reference clock source to synchronize the clock of other devices only
after it is synchronized.

1.1 NTP Configuration Commands

1.1.1 display ntp-service sessions

Syntax
display ntp-service sessions [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed information of all NTP sessions.
Description
Use the display ntp-service sessions command to view the information of all NTP
sessions. Without the verbose keyword, this command will display only the brief
information of all NTP service sessions.
Examples
# View the brief information of NTP service sessions.
<Sysname> display ntp-service sessions
source
**************************************************************************
[12345]192.168.0.28
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations :
reference stra reach poll now offset delay disper
127.127.1.0
1
1-1
Chapter 1 NTP Configuration Commands
2 1 64 1 31.1 9.0 0.0